What is involved in pouring silicone?
The first step in pouring silicone is to collect the necessary materials. A masterpiece of some kind will be needed to create a mold; This masterpiece gives the shape of the form, allowing the user to create duplicates of this piece. The master should be made of plastic, because the silicone will not join the plastic and therefore create mold without tearing, cleavage or otherwise damage. Several different types of knives, as well as a structure that may contain mold, silicone mixture and relaxing agent, will be necessary for this process.
pouring silicone begins with the formation of a basic and wall structure that can contain silicone in its liquid form. This can be done with different materials and the sets are available to buy this process, depending on the size of your project. Once the structure is in place, the piece to be formed is set inside; It must be a little lifted from the base, usually with small braces, so there is possible poured on all sides of the piece. Master piece mIt is right to be right before the user begins to pour silicone or the form will be imperfect. The piece must also be carefully checked for shocks or imperfections.
Silicone material usually comes in two bottles. Silicone ingredients are mixed together by a 1: 1 ratio. Master should be sprayed with wax to facilitate the removal of silicone after the process is completed. Once the silicone mixture is ready, it can be poured into a mold container around the master piece. The silicone solution must cover all parts of the main and must be thick on all sides to prevent a weak final form. Pouring silicone slowly prevents the formation of pocket bubbles in final form.
After pouring the silicone, it must cure 24 hours. It stiffens, but it will still be pliable. Tform will be removed from the container and cut in half; Once the blade reaches a masterpiece in the middle, two pieces of silicone can be gentlypull. While the silicone is pliable, it can still be torn, so the process of pulling both pieces must be made slowly and carefully. Both halves of the silicone mold are then sprayed with a relaxing agent to prevent plastic forming from the silicone.