What is the cardboard palette?
moving materials effectively often require the use of a forklift and stacking device known as a pallet or skid. Traditionally, the pallets are designed from wooden boards and spacer, creating a dual platform for product stacking and inserting a towing engine or forklift blades. However, some disadvantages are associated with the use of wooden pallets or skids. Wood is expensive, heavy and potentially harmful to the floor or stacked products. One worker cannot carry many traditional wooden pallets and a lot of wooden loops can become a risk of fire.
enter the cardboard palette. The cardboard palette is designed from undulating cardboard sheets associated with thick paper. The lower layer is designed from flat cardboard leaves and then creates spacers that allow the blades of the forklift. The upper layer consists of two layers of cardboard on which a light load can be stacked. The cardboard palette is currently considered a one -timeVou commodity with limited -off. Since no nails are used in the design of the cardboard palette, there is less potential for damage to the storage space or stacked products on it. Workers can carry several cardboard skids back to the disposal or storage space, unlike the use of a forklift for stacking and storing heavy wooden pallets. Replacement of the worn cardboard palette is much cheaper than changing the order of wooden pallets from the manufacturer.
There are still some technical problems that must be developed before cardboard pallets can replace other forms. Corrugated cardboard is relatively strong compared to other paper products, but has certain limits carrying weight. The act of manipulation with a fully loaded cardboard palette damages the material itself. Pallets and loops must be designed to allow the Access forklift to make themwhich traditional technical methods inoperative. The reinforcement of the cardboard palette cannot interfere with the space reserved for the blades of the forklift. This means that the design of pallets may include reinforcement in one direction between the platform layers or by means of spacer to allow the forklift to access both directions. Wooden pallets are inherently strong enough to withstand the stress of unsupported top layers, but cardboard pallets often fail to structurally when it is stacked heavier loads.