What Is a Coil Nail Gun?
Pneumatic nailer can be used for container pallets, large wooden packaging box manufacturing fences, wooden structure connection of houses, wooden furniture and other wooden structure connections. Fast stapling, saving labor costs.
Pneumatic nail gun
- Chinese name
- Pneumatic nail gun
- Classification specifications
- 55, 70, 80, 90, 100
- Pneumatic nailer can be used for container pallets, large wooden packaging box manufacturing fences, wooden structure connection of houses, wooden furniture and other wooden structure connections. Fast stapling, saving labor costs.
- The pneumatic nail gun has about 300 nails at a time, and the nails are rolled up in a disc shape, which is convenient for nail installation, which can save working time and improve efficiency. Different types of pneumatic nail guns have different nail specifications.
- The nail gun is a combination of a gun body and a nail box. The gun body is equipped with a gun shell,
- Nail guns are divided into low pressure nail guns and high pressure nail guns according to the air pressure used at work. Usually wooden pallets, wooden pallets, and wooden packaging only need ordinary nail guns, that is, low-pressure nail guns.
- When the nail gun works, the striker needs to perform piston-type movement in the cylinder, so it is necessary to add lubricating oil from time to time to reduce component wear. In addition, because the nail gun needs to be powered by compressed air, and the air contains a large amount of water, it is best to connect an oil-water separator device (also called a three-point combination) between the air compressor and the nail gun. To a dehumidifying effect, avoid too much moisture inside the nail gun to cause the rubber ring inside to swell and fail due to soaking. In addition, in a dusty working environment, the surface of the nail gun should be regularly cleaned to prevent dust from affecting the trigger unit and the nail pusher.
- 1. Wear safety glasses or dust-proof glasses
- 2.Ears must be protected in certain working environments
- 3. Do not use power sources other than compressed air
- 4. Operate with proper air pressure
- 5.Do not operate the gun near olefinic substances.
- 6. Do not use other inappropriate connectors without authorization.
- 7. When the gun is not used, the air source must be cut off and the nails in the nail slot seat must be taken out.
- 8.Check for tightness of screws
- 9. Don't touch the trigger other than nailing
- 10, the muzzle must not be facing people
- 11. Must use specified nails
- 12, the muzzle must be aimed at the nail
- 13. When loading nails or operating the gun, do not place your hands or body where the nails may hit.
- 14. Do not nail on the edges, corners or too thin nails.
- 15. After the nail is driven in, do not nail it again.
- 16, the work must be removed from the nail box or the remaining nails in the gun mouth
- 17. When using a safety device, you must always check whether the safety device is normal.
- 18. When operating the gun outdoors or at a high place / when operating the gun on a roof or an inclined place, the gun must be moved from the bottom to the top in order to operate. There is a danger of slipping when operating in the opposite direction. When nailing, the air pipe must be fixed near the work site. Accidental pulling or tripping of the air pipe may cause accidents.
- 19. If certain control parts (such as triggers and bumpers) of the nail gun have been disassembled, disassembled, remodeled or cannot operate normally, this gun must never be used.
- 20.This gun must not be fired at a place where there is no nail.
- 21. When using this gun, you must always have a nail inside the gun.
- 22. Use this gun as a working tool with proper respect.
- 23. Playing with a nail gun is strictly prohibited
- 24. During the operation of any part of the gun control mechanism (such as the trigger, the safety frame), the gun nails must not be loaded.
- Pneumatic nailer gun troubleshooting solutions: Sometimes problems occur during the use of the pneumatic nailer gun. Now we will analyze the phenomenon of the pneumatic nailer gun in detail, and analyze the cause and find out the solution according to the phenomenon . Here are some examples of common faults and their solutions:
| malfunction | the reason | Solution |
| Leak without trigger trigger | Switch lever 0 ring break | Replace 0-ring |
| End cap leaks | End cap 0 ring break | Replace 0-ring |
| Leakage without trigger trigger |
| (1) Replace the tight ring |
| (2) Tight ring 0 ring break | (2) Replace the 0-ring | |
| Air leakage around the cylinder head | (1) The screws are not tightened | (1) Fastening screws |
| (2) Cylinder head gasket is broken | (2) Replace the cylinder head gasket | |
| Air leak in the cylinder head without triggering | (1) The O-ring is damaged | (1) Replace the balanced 0-ring |
| (2) There are sundries or broken seals on the balance valve | (2) Remove debris or replace seals | |
| Leak on the trigger | (1) The cushion pad is worn | (1) Replace the cushion |
| (2) Debris on the cushion | (2) Remove debris | |
| (3) Piston assembly is cracked or worn | (3) Replace the piston | |
| (1) O-ring is damaged | (1) Replace the balanced o-ring |
| (2) The balance valve is damaged | (2) Replace the balance valve | |
| Cannot start | (1) Insufficient air pressure | (1) Adjust the air pressure |
| (2) O-ring deformation of balance valve | (2) Replace the balance valve O-ring | |
| (3) The surface of the O-ring of the balance valve is not lubricated | (3) add smooth oil | |
| The sound is abnormal | Check if the screws of each part are loose | |
| Cover cannot be closed | (1) The nails are not placed properly | (1) Re-nailing |
| (2) The container lid is not closed properly | (2) Re-close the staple container cover | |
| Shot gun | (1) The piston cannot be returned | (1) Replace the 0-ring of the piston, check the air supply, check whether the piston is damaged, and check whether the cylinder head cushion cushion blocks the exhaust hole |
| (2) The nail feeding claw is too tight and the nail feeding is too slow | 1. Remove the debris around the nail-feeding claw 2. Clear the debris inside the nail-feeding piston 3. Replace the 0-ring of the nail-feeding piston | |
| (3) The nail block does not return or the elasticity is insufficient | Replace the nail block compression spring | |
| (4) Deformed or bent nail rolls | Unroll the nail roll, straighten it, and re-screw | |
| (5) Welding wire is not easy to send out | Replace the nail with moderate flexibility | |
| Staple | (1) Nails are not standard | (1) Please refer to the specification of gun nails when selecting standard nails |
| (2) Deformed or bent nail rolls | (2) Unroll the nail roll, straighten it straight, and re-screw it | |
| (3) Check if the head of the firing pin is worn | (3) Replace the piston assembly | |
| (4) Check whether the nail head is worn | (4) Replace the nail head | |
| (5) Check if there are more nails in the nail head | (5) Remove the remaining nails |
- Note: The method of retracting the nail after nailing.
- First unplug the air source, press the opening and closing pin, open the cover and the nail box cover, take out the remaining nails, and use a 3-5mm iron rod to align the nail tips
Tap lightly with an iron scoop. Remove the stuck nails, you can continue to use after re-stitching.