What is the CounterSink drill?

Countersink drill is designed to create a hole in the shape of a cone in metal, wood or plastic. The primary purpose of the CounterSink drill is to create a hole in the material deep enough to allow to rinse the head of the screw with the surface of the material. This type of drill can be found in production and construction. The use of the CounterSink drill allows the application of drywall, colors or wallpaper to completely cover the location of the screw.

Although many people assume that the CounterSink drill is a specialized product, in fact two options are available: reserved or modified. The dedicated drill is designed to always create Countersink. The drill bit is interchangeable, allowing the user to select the appropriate dimensions based on the project requirements. The purchase price of these types of exercise is slightly higher than for a standard drill, but can be useful if this type of drilling is a constant requirement.

Modified use of CounterSinkstandard drill exercise, but requires purchase and implementation to adaptthe drill bits. These bits cost more than standard drill bits due to the need for further depth. Before making a purchase decision, make sure that any drill bit is compatible with the manufacturer and the drill model.

6 The type of material in which you plan to drill is necessary when choosing a drill bit. Most stores clearly indicate different drilling pieces and organize them according to the material. Take the time to check all the options and select a description of the material that matches your real material most.

The length of the drilling bit is determined by the intended use. The drill bit must be long enough to create a hole at a suitable depth. Think about the Projects you will use this drill and make sure it is long enough to meet your immediate and future needs.

CounterSink depth is also dependent on the material used and the final product. For exampleThe CounterSink drill used in the construction must be deep enough, so the screw head is completely covered by the application of color, plasterboard or wallpaper. In production, however, it may be enough for the head to be flushed with the surface. Measure the depth of the material and find the right drill for the task.