What is a flexible flat cable?
Flexible flat cable (FFC) is a type of flexible electronic piece that consists of many sources of electric wire placed side by side in a wide and flat assembly. Similar to a belt wire used in electronic devices, such as computer printers, a flexible flat cable is used in mobile phones and laptop computers where an electrical connection is required to save space. Unlike a typical electronic connector, a flexible flat cable rarely uses a large plastic plug soldered at the end of the wire strands. This type of wire does not use any added wire connectors; Instead, small metal pins protrude from the end of the flat ribbon and simply place in the receptor openings at the receiving end of the device. Many manufacturers have left the stuck copper wire usually used in creating electronic devices and accepted a one -time Strand wire that is closed in a thin, flat plastic sheet. This flexible flat cable is able to bend, bendingWhether it is indefinite for a time without breaking. The thin and flexible flat cable is commonly connected to a slightly stronger plastic film to give the wire the required force to allow the worker to connect the wire to the desired receptor without folding the pins.
The size of the flexible flat cable is described as a certain pitch. The pitch refers to the distance that the wires used to create a flat strand are distant apart. In order to find a pitch of non -flexible, flexible flat cable, the width of the flat cable must be divided by the number of connecting strands that are inside the plastic outer cable. Since the most common type of plastic coating used to produce the cable is colored and not transparent, it is best accommodated by counting the number of connecting pins that are exposed at the end of the cable.
Another descriptive, dimensional identifier for flexibleThe flat cable is known as the length of the exposure. This applies to the length of the pins or electrical contacts that were left at the end of the flat cable. Many cables use what is known as reinforcement at the end of the wire. It is a thin protection belt that usually has a conductive material located on every wire that ranges from a flexible flat cable. This acts as a type of plug to provide a little more power when inserting the cable into the receptor.