What is a float switch?

Float Switch is a switch mounted inside the float that is activated when the float reaches a certain level. As soon as the float switch reaches a specific angle, the mercury switch is often activated and then switches off as soon as the float settles again at an angle or the landlord level. Float Switch will sometimes consist of anything other than a float connected to micro switching with a rod that turns on and off when the float rises and falls. The floating switch is commonly used on the well -pumps and water wells and is considered a simple but reliable way of activating pumps, drainage, warning lights and sirens in countless settings and applications.

The switch version of the switch is used in the toilet tank and controls the flow of water into the tank. As the water level drops at the time of flushing, a large float attached to the metal rod drops and activates the water valve that allows the water to enter the toilet tank. As the water level is restored inside the tank, the float rises on the surface of the water. When the float reaches the topParts of its settings, the switch turns off to stop the flow of water into the tank. This process is repeated after each flushing, showing the efficiency and durability of the switch float.

6 When the water enters the sump tank, the plastic or metal float begins to rise. The float is commonly attached to a rigid structure at one end, causing the float to rotate or roll over when it is at the water level. The mercury switch inside the float is connected to the electric pump by connecting the pump fraud. Once the float is reached the right angle, Mercury runs to the low side of the switch and completes the perimeter, allowing electricity to reach the Motor pump and start pumping water from the basement or structure.

As soon as the water is pumped from the tank and the float reaches its resting level again, the mercury flows from the switch and the contact is interrupted in the wiring bundle and turns off the pump engine. While plastic is used for MNOho designs Float switches, sometimes metal float is used on pumps with higher ends and well engines. In this design, the float switch is commonly placed in copper, aluminum or tin float to prevent rust and deterioration in the submerged position.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?