What is the furnace burner?
Of all parts of the furnace, the burner is the most important. The furnace burner is a point in an oven where the air and fuel mixture is burned to produce heat. There are several different types of furnaces that burn different fuel types depending on application.
Industrial furnaces have burners that are definitely difficult to operate and types of fuel used. Typical industrial furnace has a cylindrical shape with a burner on the bottom, which fires up. Around the burner on the floor of the furnace is a material called refractory, which is sufficiently stable so that one goes to go to the maintenance of the furnace. Some older models have been manually lit, although almost all of them were gradual due to apparent risks. The furnace burner may include a demonstration to enter the burner, mix the fuel with air for better combustion.
Burner industrial furnaces will usually be one of the three main types. The first type is an atmospheric burner. Atmospheric burners work on liquid oil fuel that is mixed with an eyelifting air just before the combustion. This type of furnace burner is best suited for industrial applications where temperatures are required than 1060 degrees Fahrenheit (572 ° C).
pre-mix furnace burner is the one where air and fuel are mixed before entering the combustion burner. This type of furnace burner creates much higher pressures than atmospheric burner, which brings greater efficiency and warmer flame. There is also a greater degree of control over a mixture of air and gas. Pre-mix burners are also a bit easier to control than another type, burner on the mixer.
and Thezle-Mix Furnace Burner performs mixing of fuel and air after leaving the burner. Until they reach the head of the burner, they are held separately, allowing lower pressures leading to the burner. There is also no chance of flashback, a dangerous condition in which the fuel burn prematurely while still inside the burner. This type of burner also has the advantage of being capableEN to create different flame shapes and properties to meet the requirements of any industry.