What is the hanger?

You may have wondered how the legs of the table and chairs will remain magically attached to the table, usually without visible signs of hardware. In fact, it is not magic at all that keeps them in place, but rather a simple device called a hanger, or sometimes a hanger. It is designed to be driven into wood or other soft material. At one end are the threads of wooden screws that are pointed and on the other side of the machine thread. Both fibers may meet in the middle, or there may be a cheated shaft in the center. The length of the fiber may vary from 1-1/2 inches (3.8 cm) to 3 inches (7.6 cm). Installation generally requires the use of a special key. For example, the legs of the table and chairs must be firmly attached to the table and would require the screen to be fully, so there is no gap. Such projects would require a larger, stronger hanger screw to support the weight of the table table or in the case of a chair, the weight of the adult.

hanger screws are generally available in local houses or hardware stores. In addition to the legs of the table and chairs, they are used for many other purposes. They can be used to build a railing, connect the arms of chairs to the chair base or to connect the elbow backrest door to the car door. Any other application in which the hardware attaching two items must not be visible is definitely a candidate for a hanger.

The next time you visit a local hardware or home store, check out the hardware aisle and notice a wide range of screws available here. If you feel really adventurous, turn one of the legs from the kitchen chair and look at the hanger in action. Of course, you will return it safely, or someone in the family can end up on the floor!