What Is a Heavy Duty Puncher?

Manual puncher, manual puncher, manual puncher and other aliases, which are mainly designed on the principle of leverage, use manual methods to drive the punching machine's executive parts up and down to cooperate with the lower mold to complete the punching.

Manual punching machine

Right!

Manual punching machines, manual punchers, manual punching machines, etc.

Manual punching machine and manual punching machine, manual punching machine and other aliases, which are mainly designed on the principle of lever, use the manual method to drive the punching machine up and down to cooperate with the die to complete the punching. Working method: pure manual punching.

Divided by specifications: 1. Manual heavy-duty punching machine. 2. Manual light punching machine.

Divided according to the number of holes: 1, single hole manual puncher. 2. Multi-hole manual punching machine.

Divided by hole type: 1. Manual hole puncher. 2. Manual punching machine for sawtooth holes. 3, special-shaped hole manual punching machine.

Divided by operation: 1. Handle puncher. 2. Rocker-type manual punching machine. 3. Rotary manual punching machine.

1. Fix the manual puncher on the work surface as required, turn the manual puncher wheel gently and carefully check the working conditions of each part of the puncher.

2. Check if there are sundries in the punch and the lower die position, and clean up in time. Then add lubricant to the contact position of the punch guide bush and the top of the mold base.

3. Put the materials to be punched according to the positioning requirements, and then turn the manual wheel counterclockwise to complete the punching.

4. After finishing punching, stop turning the wheel with your left hand, and gently pull out the punched material from inside to outside with your right hand.

5. Repeat step 4 to continue punching the next material to be punched (and so on).

6. In the actual working process of the punching machine, the oil storage tank of the punching machine should be kept oily at all times, so as to provide lubricating and cooling for the execution parts of the punching machine.

7. After the work is finished, the garbage should be cleaned for the manual puncher to keep the puncher clean and dry.