What are high -speed doors?
High -speed doors are the type of automatic sliding or rolling doors that are designed to open and close very quickly. The purpose of this type of door is to maintain climate closed areas preventing excessive heat leakage in both directions. Such doors are most commonly used in an industrial or commercial environment with a high level of operation in a given closed area, such as a warehouse. High -speed doors open and close quickly to minimize the amount of heat that is able to escape or enter the cover, thereby the lowest heating and cooling costs. They can also be used to ensure that air pathogens cannot easily spread between areas, although this is not such a common problem.
The most common reason for installing high -speed doors is to reduce heat flow between two areas. Normal doors can be open for a few seconds every time it goes through an individual, allowing to flow enough heat from one area tothe other. This can be expensive if it shines from the heated cover to the cold outside, because more energy must be invested to make the heated area warm. High -speed doors can help ensure that the door is not open much longer than the time required to pass the individual through the door.
Their ability to minimize heat leakage to or from the cover is high -speed doors particularly valuable in areas controlled by temperature. Some warehouses, laboratories and shops have areas that must be kept above or below a certain temperature. A significant deviation from the desired temperature can cause damage to products, samples or other materials. High -speed doors can minimize potential temperature fluctuations by ensuring that the exposure to the closed temperature by external uncontrolled temperatures is maintained at an absolute minimum.
Security is the main problem of these installation experiments and usedHigh -speed doors, like high -speed doors, can be quite difficult and tend to close quickly enough to seriously hurt anyone who was caught on his way. This type of door is generally installed with two or more highly sensitive and redundant safety systems. The door usually opens due to pressure or optical sensor and will not close until the individual leaves the sensor area. In addition, most systems have pressure sensors built into the door, so if the doors hit themselves when it closes, it stops and opens again.