What Is a High Temp Epoxy?

High-temperature epoxy resin AB adhesive refers to a two-component epoxy resin adhesive with high temperature resistance, which is mainly made of epoxy resin. In addition to the high bonding strength, high hardness, high chemical resistance, high transparency, and good yellowing resistance of general epoxy resin adhesives, it also has a long-term temperature resistance of 150 degrees, even in vertical The surface or suspended ceiling does not sag, it is moderately dry, safe and environmentally friendly.

High temperature epoxy AB glue

Right!

High temperature epoxy AB glue refers to

Take epoxy ^[1]

1. Colorless, transparent and viscous, fast curing speed;

2. High bonding strength, can be cured at low or normal temperature;

3. After curing, it has high hardness, high chemical resistance, good acid and alkali resistance, good moisture and water resistance, oil and dust resistance;

4. The cured product has good electrical and physical properties such as insulation, compression resistance, and resistance to yellowing.

5. It can work for a long time at a low temperature of -50 degrees and a high temperature of 150 degrees, and can work at a high temperature of 200 degrees for 10-20 minutes.

1. Color: colorless and transparent

2. Mixing ratio: 1: 1

3.

1,

1. Any electronic or other products that require fast bonding and fixing can be used;

2, widely used

1. Surface cleaning: remove loose materials on the surface of the adhesive, use

1. AB glue will start to solidify after mixing, its viscosity will rise quickly, and it will release heat;
2. The high-temperature epoxy resin AB glue cures fast, please reduce the amount of glue once as much as possible! The more glue mixed together, the faster the reaction, the faster the curing speed, and may accompany a large amount of heat, please pay attention to controlling the amount of glue once, because the reaction time is faster, the available time is also It will be shortened, and the glue solution after mixing can be used up as soon as possible;

3. A very few people will have mild skin allergies and mild itching if they are exposed to the glue for a long time. It is recommended to wear protective gloves when using it. Wipe off the skin with acetone or alcohol and wash it with soap;

4. Before using it in large quantities, please try it in small quantities first, and master the use skills of the product to avoid mistakes.