What is a mechanical room?
Mechanical room is a room in which a number of mechanical devices, especially devices used to control the environment in the building. Sometimes it is referred to as a boiler room - which refers to the boiler that can be placed in it - or as a room for mechanical equipment. Electrical equipment used in conjunction with these items and safety equipment is also usually found in this room.
Specific equipment found in the mechanical room depends on what is needed for the specific building in which it is located, as well as local building codes. For example, boilers thermal water supplied to the building either pipes to heat air or for direct use, such as in the kitchen. Chiller tubes and compressors can be used to circulate chilled water through the building for cooling purposes. Water or cleaner softeners may be present to minimize the scale deposit and improve the efficiency of the device by which the water circulates. Heat transv mechanical rooms can also be found by coils,Pumps, pumps, fans, engines and many other objects.
Design reflections for the mechanical room include suitable distribution of equipment and efficient drainage. The equipment must be determined to be sufficient space for regular planned maintenance and repair. Sufficient ventilation of the room helps to prevent overheating of mechanical devices such as boilers, water heaters, hot water tubes and more. The floor of the room should be properly built towards drainage and be without depression where condensation or dangerous chemicals could be collected. In certain circumstances, the pump of the sump may be required, for example, when the mechanical room is placed in the basement to prevent water accumulation.
sufficient vibrations and acoustic insulation can also be important concerns depending on the location of the room. Noise can be a problem if one of the premises that are usually occupied,such as meeting rooms, classrooms or patients' rooms in hospitals. Sensitive equipment, such as laboratories, may require insulation from vibrations made by devices in a mechanical room. The selection of locations that does not serve with this room can often alleviate these problems. If it is not possible to select an alternative location, additional equipment for limiting noise and vibration may be installed.
Design and maintenance of a mechanical room should be considered a number of safety problems. The room should be ensured to prevent unauthorized handling of the device inside. Physical insulation of the room can prevent or slow the spread of fire or explosion to other areas of the building. A manually controlled switch switch or other shut -off device can be located outside the mechanical room for emergency situations.
Developmental outlets carrying toxic fumes must be sufficiently separated from the inlet holes to Enasire that the dangerous exhaust is not circulated into the occupied areas. BreathingThe equipment, eye stations and safety shower are usually located inside the room when dangerous chemicals such as refrigerant are present. Professional standards and local building regulations can specify other safety features and procedures.