What Is a Nitrogen Compressor?
The nitrogen compressor has a working pressure range of 300Mpa for liquid and 90Mpa for gas. It is divided into single-shaft multi-stage type and double-shaft four-stage type according to the type of shaft.
Nitrogen compressor
Right!
- Chinese name
- Nitrogen compressor
- Working pressure range
- 300Mpa for liquid, 90Mpa for gas
- Divided by the type of shaft
- Single-axis multi-stage, dual-axis four-stage
- Features
- Easy to control
- The nitrogen compressor has a working pressure range of 300Mpa for liquid and 90Mpa for gas. It is divided into single-shaft multi-stage type and double-shaft four-stage type according to the type of shaft.
- Features
- (1) The working pressure range is large. Different types of pumps can be used to obtain different pressure areas. The input air pressure and output air pressure can be adjusted accordingly. Can reach very high pressure, liquid 300Mpa, gas 90Mpa
- (2) The flow range is wide, and only 1Kg air pressure can work smoothly for all models. At this time, the minimum flow rate is obtained, and different flow rates can be obtained after adjusting the intake air volume.
- (3) Easy to control, from simple manual control to complete automatic control.
- (4) Automatic restart, no matter what causes the pressure drop in the holding pressure circuit, it will automatically restart to supplement the leakage pressure and keep the circuit pressure constant.
- (5) Safe operation, using gas drive, no arc and spark, can be used in dangerous places.
- (6) The maximum energy saving can reach 70%, because maintaining the pressure holding does not consume any energy.
- classification
- According to the type of the shaft: a single shaft multi-stage type, several impellers are connected in series on a shaft.
- b Double-shaft four-stage type, four impellers are cantilevered at the two ends of two pinions, and the pinion is driven by the motor through the big gear.
- According to the type of the cylinder: horizontal split and vertical split.
- (3) Classification by inter-stage cooling:
- aExternal cooling, after each stage of compression, the gas output enters the cooler.
- b. Internal cooling, the cooler and the casing are cast into one body.