What is the plug cutter?
The plug cutter is a tool for processing wood or joinery used for cutting wooden plugs for use as pieces of fillers to repair imperfections or damage in wooden objects, where the use of wooden sealant is undesirable. Such tools are produced for use in hand -drilling or drilling press and have cutting edges designed for hard or soft wood. The plugs produced by a cutting plug have a beveled or bevelled edge for easy insertion and are taper to ensure safe adaptation, making them an excellent possibility for using wood sealant. The plug cutters can be sharp again and usually come in sets of different sizes for hard and soft wood.
The plug cutter is a hollow tube tool with a cutting edge facing one end and a spindle or shaft on the other. The shaft is inserted into the chuck by an electric drill or drilling press and a tool used to cut a circular groove into the wood. The central "column" on the inside of the groove is then baked orCut off and used as a filling plug. The inner profile of the g is that the plugs are slightly tapered with a beveled edge. These plugs are covered with wood glue and tapped to a place in the hole to be filled.
Using screws, nails and other metal fasteners in the construction of wooden furniture is a strong and long variant, but leaves aesthetic aberrations that are often difficult to mask. The same applies to Knotholes and other natural imperfections. Tutty wood can also be a quick and easily mask solution or filling undesirable holes, but has several disadvantages such as shrinking and cracking.
The plugs cutter for the production of filler plugs can be a much better choice and allows long -term, almost invisible repairs. In the construction of new wooden objects, the plugs can be cut out of the same wood used for the structure; This allows matching in color and grain, thanks to whichRemn is very difficult to detect. The wooden filler plugs also spread and close with the rest of the piece, and therefore they do not form or fall with time, as is the case with wooden sealant.
plug cutters are usually made of high carbon steel 62 ° C and can be sharpened when it is dull. Some of the plug cutters include the automatic ejection system of the plug, although they rely most on the hand plug by hand with a screwdriver or cutting the saw. Since the plug cutters do not have a central guide or a stimulant, the most accurate and consistent results using a drill press will be achieved. The plug cutters are usually bought in sets that include different sizes of cutters suitable for hard and soft wood types.