What is the pressing paint?
Pressing varnish is a type of gloss or surface that is formed by the fact that the material into contact with some type of smooth metal by heat and pressure to create a shiny appearance. Pressing the Polish approach can be used to create a smooth and glossy surface on various types of plastic foils and similar products, which are then used to produce various plastic goods. The term is also used in conjunction with different types of fabric mixtures in which heat and pressure are used to ensure the gloss on the finished material.
The key to creating a pressing gloss is to properly apply pressure and heat to the surface of the material that goes through the treatment. In the case of plastics, this usually means bringing the product into contact with some type of metal sheet or cylinder, which is heated to a specified temperature. The metal device is applied to plastic, sometimes either with direct pressing or rolling the metal over the plastic surface. In both approaches the pressure and heat are carefully monitored, so that the correct level of gloss or gloss is achieved.
A similar approach is biased in the production of pressing lacquer on the fabric. Usually this type of completion process is applied to the substance before it is cut into any type of sections, allowing a uniform gloss for the whole dose or a lot of material. The heat setting must be sufficient to work with the pressure applied to achieve the desired effect, but not so hot to damage the fibers in the material. The final result is a material that is robust and has a slight shine that is considered attractive.
Once the press lacquer is achieved, the material can be further treated to seal the shine, although this is not necessary for all products. Creating Polish usually does not affect the integrity or the robustness of the finished product. This means that it is possible to create a pressing Polish sheet that meets all quality standards for this type of product, with an added bonus of attractive gloss to the surface.
all over the worldThere are many companies that specialize in the production of printing Polish products, including plastic foils and various types of lightweight and heavier weighted fabrics. Over the past decades, technological progress has made it possible to control the degree of heat and pressure used in the process, usually using computer technology to monitor the process in real time and immediate pressure and heat adjustment as a means to adapt to the standards set for this particular project.