What Is a Slickline?
Steel wire is one of the four major varieties of steel plate, tube, shape and wire. It is a reprocessed product made of cold-drawn hot-rolled wire rod.
- Steel wire (steel wire) is one of the four major types of steel plates, tubes, shapes, and wires.
- The main processes of steel wire production include raw material selection, iron scale removal, drying, coating treatment, heat treatment,
- After the wire rod or intermediate wire blank is chemically descaled and coated, it needs to be dried at low temperature to remove hydrogen and moisture. Drying temperature is generally 26 ° C; 300 ° C. The temperature should not be too high to prevent the failure of the lubricating coating. Dehydrogenation is to exclude the hydrogen invading in the steel base during the pickling process, the purpose is to eliminate hydrogen embrittlement and restore the plasticity of the wire rod. The purpose of removing the moisture from the surface of the wire rod and drying it is to prevent the moisture from deteriorating the effect of using the lubricant. There are three commonly used drying facilities:
- Drying box
- It is a box with an upper cover, and its effective size is determined according to the maximum diameter of the spool. When working, the box is heated with 150 ~ 250 . The drying speed of this equipment is fast, the time is about 2-15 minutes, and the drying is relatively uniform.
- Tunnel drying furnace
- The combustion chamber under the furnace provides a heat source, and the temperature in the drying chamber can reach about 280 ° C. The bottom of the furnace is covered with trolley tracks and arched cast iron heat sinks. The dried wire rod or intermediate wire blank is hung on a trolley by a boom,
- Heat treatment of heat-treated wire rod or steel wire semi-finished products is described in Wire Heat Treatment. Heat treatment includes three types of raw material heat treatment, intermediate heat treatment, and finished product heat treatment.
- (1) The heat treatment of raw materials, that is, wire rods, is used in some medium and high carbon steel wires and
- Plating treatment A layer of metal or alloy is plated on the surface of the steel wire that needs to be coated on a non-gloss surface. One of the purposes is to prevent the steel wire from corrosion to improve its service life.
- According to the shape of the section, there are mainly circles, squares, moments, triangles, ellipses, flat, trapezoids, zigzags, etc. According to the size classification, there are extra fine <0.1 mm, finer 0.1 ~ 0.5 mm, fine 0.5 ~ 1.5 mm, medium 1.5 to 3.0 mm, 3.0 to 6.0 mm thick, 6.0 to 8.0 mm thick, extra thick> 8.0 mm; classified according to strength, low strength <390 MPa, lower strength 390 to 785 MPa, ordinary strength 785 to 1225 Mpa, higher strength 1225 ~ 1960 Mpa, high strength 1960 ~ 3135 Mpa, extra high strength> 3135 Mpa.
- Product introduction:
- This machine is a new-generation dual-space microcomputer-controlled electronic universal testing machine specially designed for universities and research institutes. test
- This machine adopts the all-digital AC servo speed regulation system with high speed regulation accuracy and stable performance and servo motor as the drive system, the Zhongchuang controller as the core of the control system, and the control and data processing software with WINDOWS as the operating interface to achieve the test force, The screen display of peak test force, beam displacement, test deformation and test curve, all test operations can be completed automatically on the computer with the mouse. Good humanized design makes the test operation easier. Based on the above technologies, the machine can realize closed-loop control of parameters such as test force, deformation and displacement, control modes such as constant stress, constant strain, and constant displacement, and various control modes can be smoothly switched. The machine fully meets the requirements of national standards, and can be tested and data processed according to GB, ISO, JIS, ASTM, DIN and users. It also has good scalability.
- Main Specifications:
- Maximum test force: 10kN
- Measurement range: 2% -100% of the maximum test force (choose 0.4% -100% FS)
- Testing machine accuracy level: 1 level
- Test force accuracy: ± 1% better than the indicated value
- Beam displacement measurement: 0.01mm resolution
- Deformation accuracy: better than ± 1%
- Speed range: 0.01-500mm / min
- Test space: 600mm
- Host form: door frame structure
- Host size: 720 × 500 × 1820
- Weight: about 500Kg
- Working environment: room temperature to 45 ° C, humidity 20% to 80% [3]