What is the thread?
The fiber protector is a member of the family or repeatedly applicable parts intended for closing, protection or camouflage of screw threads. They are used to protect threaded parts from damage, corrosion, contaminants and cosmetic surfaces. The thread protectors are used to protect the threaded ends on pipes, gas cylinders, oil refiners and barrel barrels. Fiber protection designs range from simple soft rubber shells designed to drag the fiber to multifunctional machined steel closures including several auxiliary elements.
screw threads are generally relatively sensitive to physical damage and corrosion. When under threaded parts or objects with uncovered sub -valves are stored or transported, they must be protected. The modest fiber protector not only serves to damage the fibers themselves, but also stops dust, moisture or other contaminants in the entrance to containers through exposed fittings.
ochRana against corrosion is another important fiber roll. Fibers sliced into galvanized pipes remove surface protection; As a result, they can be particularly susceptible to corrosion and should be covered with thread protector. They also prevent oil -contaminating oils and pose a risk of explosion. When painting newly produced parts, the fiber protector is often used to camouflage threaded connections.
Fiber protectors also serve mechanical purposes for threaded components in environments such as the oil industry. Here the protectors can have other features such as lifting the rings included in their design. These caps not only protect the fibers on the covers and bore pipes, but also serve as connection points for lifting them. These thread protectors are subject to steel objects usually containing integral projections that help them tightened on pipes.
protective caps are also used withWort weapons that are threaded to receive sound and flash suppression. These fiber protectors are generally better finished than their utilitarian industrial siblings and offer protection and cosmetic treatment. They are often annual to facilitate tightening and sometimes include integral front eyesight. The barrels of barrels are usually made of steel or aluminum and usually stamped or laser engraved with the appropriate thread height.
Thethread protectors are not always clinging and many of them are not more than simple, extruded silicone rubber sleeves. These are most often used to cover the threads on accurate screws, CO2 cylinders and on the threaded pipe with a small diameter. Materials used for protectors are usually silicone rubber, vinyl and polyethylene. These caps may include integral stopwatch and can provide a certain degree of pressure sealing in addition to fiber protection. This type of protector is often used in air conditioning and refrigeration industry to seal pipes andService points against Ingress contaminants.