What Is a Tile Saw?

Manual tile cutting machine does not use electricity, no dust, no noise, and low loss. In this era of pursuing environmental protection, more and more construction workers are aware of the serious harm of dust to their own health, and the huge impact of noise on the environment. Green environmental protection manual tile cutting machine has entered people's lives.

Manual tile cutter

Manual tile cutting machine does not use electricity, no dust, no noise, and low loss. In this era of pursuing environmental protection, more and more construction workers are aware of the serious harm of dust to their own health, and the huge impact of noise on the environment. Green environmental protection manual tile cutting machine has entered people's lives.

Chinese name

Manual tile cutter

Classification

Decoration instrument

Manual tile cutting machine is easy to operate, environmentally friendly, clean, convenient, professional, accurate, high quality and efficient.

Features: No water, no electricity, no dust, no noise, successfully cut a tile in 3-5 seconds.

Cutting principle and

Step 1: Position the line

Square the tile on the floor, if necessary, unfold the bracket, lower the handle to make the cutter wheel contact the tile surface, and push the handle slightly forward to make the cutter wheel cut a continuous and even straight line on the tile surface.

Step 2: Press to disconnect

Pull the handle back quickly, and the tile breaks along the score line.

Famous craftsman experience:

Whether the scribe line is uniform, continuous and clear from beginning to end.

1. Do not press the knife wheel with a hard line, just draw a uniform and continuous line on the tile surface gently, and the line should be drawn from beginning to end

2. Do not repeatedly use the cutter wheel to scribe, so as not to affect the cutting accuracy and cutter wheel life;

3. Avoid water and sand in the guide rail. If there is water or sand, please clean up in time;

4.

Common problems: The cutting line is not straight, the tiles do not follow the knife, and the marks are cracked. The tiles are broken, the edges of the tiles are jagged, or jagged. The ruler is not accurate, and the tile is missing corners when cutting.

Troubleshooting method

1. Shaft and rail deformation; 1. Re-straighten or replace the main shaft;

The cutting line is not straight 2. The bearings on both sides of the cutting head are too loose; 2. Tighten the bearings on both sides;

3. The blade device is not correct; 3. Correct the blade device

4. The blade is deformed. 4. Replace the blade.

The tile does not follow the knife 1. The blade is too blunt or the cutting force is uneven; 1. Replace the blade

The marks are cracked 2. The platform element pin is deformed; 2. Correct the platform;

3. Deformation of the presser foot; 3. Correction of the presser foot;

4, tile quality problems. 4. Try another ceramic.

Tile breakage 1. Imbalance of presser foot; 1. Correction of presser foot;

Brick edge is not correct 2. Deformation of the guide rail 2. Replace the guide rail;

Or jagged 3. Excessive use of pressure when cutting; 3. Reduce the amount of downforce when pushing;

4, tile quality problems. 4. Try another ceramic.

The measuring rule is not accurate 1. The blade device is loose; 1. Correct the cutter head again;

2. Deformation of the measuring scale; 2. Replace the measuring scale or adjust it separately;

3. Reverse rod adjustment rod; 3. Adjust the adjustment rod;

4. The blade is damaged; 4. Replace the blade;

5. The bearings on both sides of the cutting head are too loose; 5. Tighten the bearings on both sides.

Tile corners when cutting 1. The presser foot is damaged; 1. Replace the presser foot;

2. Asymmetry of the guide rail; 2. Correction of the guide rail;

3. Tile quality problems. 3. Try replacing other ceramics.

Notes and tips:

1. When cutting, drag the "handle" back to the highest control position to avoid collision between the blade and the tile, otherwise, the blade will be unusable due to the defect.

2. For ceramic tiles such as antique or other convex and concave irregularities, please change the cutter head! Rough-faced tiles shorten the life of the blade.

3. Do not use a blade to break the brick during operation.

4. When cutting, first pull the push-pull lever to the back, let the blade lightly press on the tile, push forward along the main shaft to the front control slot, rest the presser foot on the tile, and tap the end of the push-pull handle , The tile will break with the knife marks

Warm reminder: During the cutting process, the thinner and shallower the cutting line of the knife mark, the more positive and beautiful the shape of the edge of the tile pressed by the tile will be. On the contrary, the deeper and thicker the knife mark line, the more sloping and crooked the shape of the bottom of the brick that is split on the edge of the brick, even if it is jagged, so it must be light when pushing, but the cutting line on the tile cannot be interrupted, otherwise There will be a bouncing phenomenon.