What is the chase of walls?

Wall pursuer is a power supply tool used to chase or cut channels in the walls of masonry to comply with an electrical connection or pipe. This tool is usually manually operated units similar to construction to the grinding angle that creates cuts using abrasive disks or brick blades. Most of the pursuers on the wall contain the heads of the traction, which provide provisions for assembly either one or two discs or blades simultaneously. Dual blades allow the channel to be reduced in one passage. Since masonry cutting generates a large amount of dust, the wall pursuer usually includes the assembly of the dust extraction system.

Electrical wiring and pipes are generally installed after building buildings. Routing of cabling or pipes requires a groove or persecution to be cut on the wall surface to adapt to them. Days of electric tools were persecuted by persecution with a pursuit of chisel and toLadiv. Although this method is still used and is useful in tight places or for short chases, it is laborious and the time concest of the process. The chasing machines of the chase of the wall make short, not the noisy and dusty work, the work with long involvement and persecution of the pipeline in the most difficult masonry.

Modern wall -mounted hand tools are similar to angle grinders in the design, except that the blades are vertically oriented. Abrasive disks such as disks used on angle grinders or special brick blades are used to cut. The driving heads of the wall pursuers usually provide a provision for mounting one or two blades or discs at a time. Dual blade configuration is generally used where slices of full width are required for mounting water pipes and electric pipes. There is a relatively large range of different models of wall pursuing with an average power ongoing between 1 200 watts and 2,000 watts and with a blade size between 6 and 9 inches (150–230 mm).

masonry cutting generates a large amount of fine dust. As a result, most Chasers will have either a dust bag or mounting to connect to a dust extraction system. These systems should always be used in conjunction with a dust mask or respirator, as the generated dust can be truly impressive.

Chaser wall is a powerful tool that controls a few extremely sharp blades; It is wise for operators that it is fully familiar with the operating instructions of the manufacturer and safety measures before the machine is fired. Personal protective equipment is also a necessity; Eye and hand protection should always be worn. Before persecution, it is also important to use a suitable scanner to check the presence of another pipe and cabling in the wall.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?