What Is an Air Washer?

The floor heating washer is also called a geothermal washer, which is mainly used to clean geothermal pipes. The fully automatic pulsed geothermal cleaning machine uses a combination of gas, water, and electromagnetic pulses to convert kinetic energy into kinetic energy through internal vortex power, and perform high-speed motion in the form of tiny molecules, and through thermal energy, kinetic energy, and electromagnetic pulses during operation. Decompose the dirt in the pipe wall and flush out of the pipe with water molecules to achieve the effect of cleaning the floor heating.

Floor heating washing machine

The floor heating washer is also called a geothermal washer, which is mainly used to clean geothermal pipes. The fully automatic pulsed geothermal cleaning machine uses a combination of gas, water and electromagnetic pulses to convert kinetic energy into kinetic energy through internal vortex power, and perform high-speed motion in the form of tiny molecules, and through thermal energy, kinetic energy and electromagnetic pulses during operation. Decompose the dirt in the pipe wall and flush out of the pipe with water molecules to achieve the effect of cleaning the floor heating.

Chinese name

Floor heating washing machine

Alias

Geothermal cleaning machine

Category

Pulse cleaning machine

Cleaning method

Physical pulse

Sewage Index

Green and pollution-free

The fully automatic pulsed geothermal cleaning machine uses a combination of gas, water, and electromagnetic pulses to convert kinetic energy into kinetic energy through internal vortex power, and perform high-speed motion in the form of tiny molecules, and through thermal energy, kinetic energy, and electromagnetic pulses during operation. Decompose the dirt in the pipe wall and flush out of the pipe with water molecules to achieve the role of a washing machine.

1: The appearance design has obtained national patents; the practical + fashionable design concept is the best in domestic geothermal cleaning machines;

2: Without dismantling the pipe, connect the connecting pipe with the water separator to perform the cleaning work;

3: Without any chemicals and chemicals, there is no corrosion on the inner wall of the pipeline and system components, and the discharge will not cause pollution to the surrounding environment.

4: Non-blocking, suitable for cleaning all kinds of complicated pipeline systems.

5: Small and light, easy to operate, and fast to clean.

6: The cleaning inspection method is simple, through observation. You can observe the effect of cleaning and draining sewage, and you can also compare the unpipes before and after cleaning.

7: This equipment can not only clean the geothermal pipes, but also the radiators, heat sinks, household water pipes, household water heaters and the pressure on the geothermal pipe system.

1: Gas and water automatic pulse generator: It is the main component that generates high-pressure gas pulses. It combines gas and water and forms a high-pressure water jet and air flow for cleaning under the control of a fully automatic pulse controller

2: Full-automatic intelligent pulse controller: Full-automatic intelligent control pulse generator, which emits physical intelligent pulse waves of different frequencies and wavelengths according to cleaning needs. This machine has been preliminarily commissioned to the fully automatic intelligent pulse controller when it leaves the factory, and generally does not require users to do it again.

debugging. Only slight changes to the blockage of the pipeline can be made. . Due to the addition of this high-tech product, the cleaning process is simple and easy to operate.

3: Air compressor: Generates 0.8Mpa of high-pressure air to provide sufficient aerodynamic power for cleaning.

4: Connection pipe: connect the washer and geothermal water trap, connect the washer and water source, connect the washer and air compressor, and connect the water return to the drain point.

The compressed air and water provided by the air compressor are input into a fully automatic pulse generator, and the pulse generator is controlled by a fully automatic pulse controller, which emits physical pulse waves of different frequencies and wavelengths according to the cleaning needs. The reference data is reflected to various instruments on the panel of the machine after intelligent matching. The inner wall of the cleaning pipe is subjected to high-pressure water jets and airflow shocks and wave vibrations. The rust on the inner wall of the pipe and the deposits in the pipe are peeled off layer by layer, and the pipe ends Quickly drain out of the pipe with the water flow, and work repeatedly until the cleaning purpose is achieved.

(A) connection

1. Close the main valve of the water separator and return water of the water separator;

2. Connect the pulse lead-in tube and connect the digital computer pulse generator with the head of the water receiving plug of the water separator;

3. Connect the water pipe, connect the water source with the computer pulse generator;

4. Connect the air pipe, connect the air compressor and the computer pulse generator;

5. Connect the sewage pipe, connect one end to the header of the water return plug, and add one end to the floor drain.

(2) Start-up and cleaning

1. Connect the power of the air compressor and the digital computer pulse generator, press the power switch on the pulse generator, start the compressor to make it work at a rated pressure of 0.8Mpa;

2. Open the compressor air supply switch and the system water supply valve;

3. Open one separator valve on the water separator, close the other separator valves, wash one open one, and clean one by one;

4. After seeing backwater at the sewage discharge end, the operation controller controls the digital computer pulse generator to send physical pulse waves into the geothermal pipeline to start cleaning. You can adjust the pulse cleaning frequency for cleaning according to the length, installation time, and scale status of the geothermal pipe. Until cleaned

2. Unfasten the four connecting pipes separately;

3. Open the main valve of the water separator and return water of the water separator;

4. Return the water trap to its pre-wash condition.

Six, matters needing attention:

1. All connection parts must be tightened to prevent leakage, the tube must be inserted to the end when connecting, and the snap ring must be pressed to the end when removing;