What Is an Aluminum Truss?
Aluminum alloy trusses are also called trusses. Generally, it is a combination of 6061-T6 aluminum material after cutting, processing, welding, polishing, spray painting and other treatments. It is widely used in performance exhibitions, event celebrations, background layout, lighting and sound hanging systems. According to the site, it can be built into a variety of large, medium and small truss systems, and can be flexibly combined according to specific requirements. Light weight, easy to set up and transport, the maximum span can reach more than 30 meters, and the aluminum material has strong resistance to compression, corrosion and durability. According to the shape, it can be divided into square (corner) frame, tripod frame and special-shaped frame. According to the installation category, it can be divided into bolt-type truss and screw-type truss.
- Aluminum alloy trusses are also called trusses. Generally, it is a combination of 6061-T6 aluminum material after cutting, processing, welding, polishing, spray painting and other treatments. It is widely used in performance exhibitions, event celebrations, background layout, lighting and sound hanging systems. According to the site, it can be built into a variety of large, medium and small truss systems, and can be flexibly combined according to specific requirements. Light weight, easy to set up and transport, the maximum span can reach more than 30 meters, and the aluminum material has strong resistance to compression, corrosion and durability. According to the shape, it can be divided into square (corner) frame, tripod frame and special-shaped frame. Can be divided into bolt-type truss and screw-type truss according to installation category [1]
- The aluminum alloy truss is mainly composed of the following: 6061-T6, 3mm thick round aluminum, 10mm thick triangular aluminum plate and end ring (the pin truss also includes pin joints)
- A complete set of aluminum alloy truss systems: mainly composed of aluminum alloy trusses of various lengths and specifications, bases, reverse heads, diagonal supports, square sleeves, crossarms, hoists, slings. Build and combine [1]
- Aluminum alloy light stand 300 * 300mm 1M material: 50 * 3mm, inclined tube: 25 * 2mm, hollow flat aluminum welding on the end face, maximum span: 14m. Average total bearing: 500kg
- Aluminum alloy light stand 300 * 400mm 1M material: 50 * 3mm, inclined tube: 25 * 2mm, solid triangle plate welding on the end face, maximum span: 15m. Average total load: 600kg
- Aluminum alloy lighting stand 400 * 400mm 1M material: 50 * 3mm, inclined tube: 25 * 2mm, solid triangle plate welding on the end face, maximum span: 16m. Average total load: 700kg
- Aluminum alloy lighting frame 450 * 450mm 1M material: 50 * 3mm, inclined tube: 25 * 2mm, solid triangle plate welding on the end face, maximum span: 16m. Average total load: 800kg
- Aluminum alloy lighting stand 400 * 500mm 1M material: 50 * 3mm, inclined tube: 25 * 2mm, solid triangle plate with end face welding, maximum span: 16m. Average total load: 800kg
- Aluminum alloy lighting stand 500 * 600mm 1M material: 50 * 3mm, inclined tube: 25 * 2mm, solid triangular plate welding on the end face, maximum span: 16m. Average total load: 850kg
- Aluminum alloy lighting frame 520 * 760mm 1M material: 50 * 3mm, inclined tube: 25 * 2mm, solid triangular plate with end face welding, maximum span: 16m. Average total load: 900kg
- Aluminum alloy lighting stand 600 * 760mm 1M material: 50 * 3mm, inclined tube: 25 * 2mm, solid triangular plate welding on the end face, maximum span: 16m. Average total load: 950kg
- 1. Put the four bases on the ground and adjust the lower legs so that they are on a horizontal surface.
- 2. Insert the part under the diagonal support on the outside of the base at the four corners, insert 2 at each corner, a total of 8;
- 3. Fix the reverse head on the base with screws. Note that the direction of rotation of the reverse head should be the same as marked in the figure;
- 4. Put a square cover on the reverse head;
- 5. Connect the beams on the ground;
- 6. The two ends of the beam and the two square sleeves on both sides are docked and linked. At this time, the beam parts are assembled on the ground;
- 7. Connect the column truss flatly, then screw one end to the opposite head, and the other end to the cross arm, and at the same time link the hoist and cross arm. The function of the hoist is to lift the lower beam truss ;
- 8. Multiple people slowly erect the column truss together, taking care not to push the column too hard, and then fix the screws on the reverse head;
- 9. After the column is erected, hook the hook under the hoist through the strap to the lower beam;
- 10, 4 people slowly pull the hoist together to pull the beam to the left and right positions of the person;
- 11. Install lighting and sound equipment on the beam;
- 12, 4 people pull the hoist together to a predetermined height and stop;
- 13. Tighten one end of the inclined support and the column, and the other end of the diagonal support of the base, so that the aluminum alloy frame is completed [1] .