What is an anchor plate?
Anchor plate is a structural component used mainly in brick buildings. These plates are connected to a rod or screw and are usually visible on the outside of the building. The anchor plate divides the voltage created by its anchor point and stabilizes the connected wall. These boards are usually decorated or stylized because they are visible on the outside of the building. In older buildings, these boards are made of casting or forged iron and are usually made of steel in a modern construction.
The general design of the anchor plate is the same regardless of its actual appearance. These boards are wide and flat - the larger the wider distribution area. There are rarely more than 2 feet (65 cm) across the residential building; They can be much larger on commercial or industrial structure. In the center of the board is a hole for connecting a binding rod or screw that penetrates the masonry. Anchor plate basically is nothing but Giant Washer.
The genus that sits in the middle of the anchor platLy Penetrates The Wall Behind it. In Connects to the Inner Frame of the Building, ophthen hooking directly into the horizontal floor supports. These Connectors are paid approximishes every 6 Feet (2M) on the outside of a building, on every floor. They Are Essential What Keeps The Outer Wall of the Building Attached to the Inner Frame.
The Outer Wall Exerts and Lot of Force on the Sunken Bolt. In Order to Counteract This Stress, The Anchor Plate Distributes the Weight of That Wall Section Over and Larger Area. The wall develops the same force regardless of the size of the board, so the larger surface area dramatically decreases the pressure existing on any given area. IF The Plate Weren’t Present, The Wall Would Tear Itself Off the Small Head of the Bolt.
MANY ANCHOR PLATES HAVE AN ARTISIC APPEARANCE. These platesjsjsjsi extremely functional, but are created to look like decoration. They still have de deSky several places where contact with the side of the building firmly establish. The plates are often symmetrical, so the pressure spots are directly against each other. This improves the strength of the board after the building begins to settle.
cast or forged iron used to make anchor boards before the 20th century. Both of these materials were easy to work. However, the cast iron is fragile and iron bent slightly. Therefore, even the metal was not a perfect material. Modern buildings usually have anchor boards made of steel. High-iced steel has a very similar appearance to forged iron and is often used to make an antique appearance of the anchor plate.