What Is Corrugated Fiberglass?
The length of glass fiber reinforced polyester corrugated board is 1800, 3600mm, and the wave height is 16, 20mm.
Glass fiber reinforced polyester corrugated board
Right!
- Chinese name
- Glass fiber reinforced polyester corrugated board
- Length
- 1800, 3600mm
- Wave height
- 16, 20mm
- Wave length
- 63, 75mm
- The length of glass fiber reinforced polyester corrugated board is 1800, 3600mm, and the wave height is 16, 20mm.
- Glass fiber reinforced polyester corrugated board
- First, selection points
- 1.1 Product definition
- A corrugated board with an approximately sinusoidal waveform and a trapezoidal cross section is made of non-twisted glass fiber roving and its products and unsaturated polyester resin.
- 1.2 Product Classification
- 1) According to the molding method, it can be divided into hand lay type and mechanism type.
- 2) According to the performance, it can be divided into ordinary type, light transmission type, flame retardant type and flame retardant transmission type. The flame retardant type is divided into 2 levels according to the flame retardant performance.
- 1.3 Product Specifications
- Width: 740, 800, 1000, 1200, 1400mm.
- Thickness: 0.8, 1.0, 1.2, 1.6, 2.0mm.
- 1.4 Implementation standards
- GB / T 142062005 "Glass fiber reinforced polyester corrugated board"
- Construction and installation points
- 1) When installing a corrugated board with a protective layer, the protective layer must be on the side that receives sunlight.
- 2) Purlins shall be installed in the length direction of the corrugated board according to requirements.
- 3) It can be fixed with screws or bolts during construction. At the same time, rubber gaskets, metal arc gaskets and pads should be used. The two corrugated plates shall overlap at least one wave in the width direction.
- 4) Do not touch open flames during installation and construction.