What is Foam Tape?
A kind of rubber. Also called sponge rubber. Vulcanized rubber with a sponge-like porous structure. There are open, closed, mixed, and micropores. Can be made of soft rubber or hard rubber products. Lightweight, soft, flexible and not easy to transfer heat. It has the functions of shockproof, shock mitigation, heat insulation and sound insulation. Made of synthetic rubber is also resistant to oil, aging and chemicals. Widely used in automobile, aircraft, chemical, daily necessities and other industries, used as thermal insulation, sound insulation, shock-proof materials, as well as making cushions, mattresses, medical machinery, sanitary products, sporting goods, etc. It can be made by adding a foaming agent (such as ammonium carbonate, urea, azobisisobutyronitrile, etc.) to the raw rubber or the concentrated latex into the air by stirring and vulcanizing.
Foam rubber
- A type of rubber
- Improper use of foam glue will cause corrosion to the application items. Please pay attention to the correct use:
- 1. Dust the adhesive surface and keep it clean;
- 2. After gluing, let it air for 20 seconds, then close it, it will be firm instantly;
- 3. Due to different air temperature and humidity, the drying time is also different. The observable method is to dry for 5 seconds, and then touch the adhesive surface every second to pull it open. Wait until you see the phenomenon of "brushing", then wait 3 Seconds, close
- 4. Strong adhesive force, does not fall off.
- Do not use
- method one
- It can be washed with banana diluent with a high concentration of thinner, but the material cannot be painted, or the color of the paint will be brushed off along with it. Use a small shovel used to brush the wall and cement to talk about the layer of foam that is attached to the surface of the glue. Do not worry about scratching, and then use an oil brush to dip banana water on the glue after brushing the foam. Corrosion for a while, 1 After 2 minutes, use a brush to brush in a circular motion, and the glue will fall off. The final cleaning is more troublesome, and finally it needs to be cleaned with clean water.
- Method Two
- The foam glue stuck to the clothes can be washed with toothpaste . The foam glue remaining on the door can be scalded with boiling water.
- Method three
- After coating with wind oil essence , wait for a while, then wipe it clean, but it is oily.
- Method four
- Blow it with a hair dryer to soften the adhesive and weaken its adhesion, which can be easily removed. If there are still small marks, wipe them off with degreasing water to remove nail polish.