What is connected to rotating the lumber protocols?

The flying trees are converted into protocols in the same place where they are cut off, and then used to cut protocols into usable sections. The process of cutting felled trees to protocols is called bucking. Once Bucking is completed, the protocols are tuned to a central place called landing. From there they are transported to the saw to turn the lumber protocols. Sometimes, when the property owner wants to use his own lumber trees, buys or rents a portable saw to turn the lumber protocols in the same place where they are felled.

The protocols are sorted by species and classified for quality than cut into timber. The Scamer protocol identifies the type of tree, measures protocols and identifies any defects such as rot to be removed. The purpose of scaling is to determine the type and price of wood. The scale can be held in the same spaces as the saw or elsewhere before transport to the saw. Protocols are usually pulled on The saw by rail or truck, or there isIt is on the waterway. The protocol is rotated inside the decree while the saws remove the bark. After Debarking, protocols are usually loaded on a carriage, a platform that moves the protocols to the head saw.

In the industrial saw, the head is usually a circular saw, while most portable saws use a band saw. Every time the trolley shifts the protocols around the head saw, drank to the slices from the log to a predetermined width until the protocol changes to a pile of harsh boards. During the next step when turning the lumber protocols, rough plates are sorted. Any defective boards are usually brought to the chips, while the boards suitable for timber are carried out through Edger.

Edger cropped the harsh edges onto the straight sides in each plate. When the trim process is complete, the ends of each plate are shortened to the desired length. The finished boards are again classified and then ready for the last stepIn the process of turning protocols to lumber: drying. The boards are dried in outdoor air or in heated rooms. When the moisture level in the boards drops to approximately 15%, the boards are suitable for use in various construction projects and can be sold as lumber.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?