What is the oriented board of the strands?
oriented chains, or OSB, is a type of lumber that shares many properties with plywood or fiber. While other types of wood sheets usually have a smooth surface, this type has a rough surface composed of hundreds of wood chips. Although these pieces of wood may occur randomly, each piece of wood is actually aligned to maximize the power of the panel. Manufacturers combine multiple layers of these wood chips to form a plate in 1 inches (2.54 cm). The layers are then subjected to high heat and pressure levels and connect with the resin to form safe bonds.
builders use an oriented board of sources to build wooden houses and commercial buildings. These boards serve as cladding to support lumber of framed walls and roofs and also serve as a base for internal or external finishes. For example, builders can attach tiles or roof tiles to plates or even apply stucco or plaster to the OSB surface. When installing above the top of the of the floor nasalKY, this type of material can also serve as a support base for floors.
OSB comes in a number of varieties to meet the needs of different applications. For internal applications, installation staff relies on interior products that are designed for areas with small to no exposure to moisture. The spring -oriented strand can be used in areas subject to minimal amounts of moisture or moisture changes, while moisture -resistant products must be used in damp areas.
One of the primary advantages of using this material is its low costs compared to plywood or fiber. While most experts agree that the plywood and oriented Strand board share virtually the same properties in terms of strength and durability, the OSB is cheaper, which can reduce the total cost of construction. The oriented board also offers more uniform and consistentThe structure, leading to greater stability. It consists mainly of wood scraps, OSB is also considered more environmentally friendly than plywood.
excess humidity can lead to major OSB problems, especially if the boards are not sealed properly. While the OSB will generally sea during production, the cutting of the field results in uninhabited edges that allow moisture to penetrate. As soon as it is soaked, the OSB tends to swell or deformation, leading to poor performance. A wet -oriented board can even telegraph the floor or wall. In order to prevent these types of problems, the installation workers must re -speed up any edges during the design to minimize the risk of moisture exposure.