What is the sweating pipe?

pipe sweating is a term used to mean several different things. Cold pipes attract moisture in the air and cause condensation to form on the outside, for example, causing "sweat". Plumbers also use this term to refer to a specific way of soldering pipes together. The pipes can do the same, especially if the air is very moist, because the water vapor in the air accumulates on the outside of the colder pipes. If this is a problem, the dehumidifier can be used in the basement or anywhere there is a problem that the water does not create and liquid.

Another way to reduce the sweating of the pipe is to isolate the pipe. Insulation of the foam tube is available for this purpose in most hardware stores and usually needs to be measured and cut to the right size. The insulation has a slot on one side so that it can fit around the pipes without a plumbing owner must disconnect anything.

in a similar phenomenon sometimes sweats the outside of the toilet tanke. Although insulation can be used to reduce this problem, another solution is to install an anti-SWEAT valve. The valve mixes a little hot water with water in the tank and prevents it from cooling enough to keep the tank to sweat.

For a plumber, however, pipe sweating has a completely different meaning. It is actually a business term for the way of soldering the pipeline along with the propane torch. The copper pipes to join are heated at the intersection point and then the solder - a metal compound is applied, which is heated and used as an adhesive between two pipes. This technique can be a complex business for beginners and it often takes a while to get the beginning.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?