What Is a Surgical Microscope?

The surgical microscope is mainly suitable for animal anatomy in teaching experiments, suture of fine blood vessels and nerves, and other fine operations or examinations that require the help of a microscope.

Operating microscope

Surgical microscope is mainly used in teaching experiments

Surgical microscope video recording and broadcasting system is also called: camera system, high-definition image display system, digital surgical image management system, etc. It is a function for medical institutions to save video recordings of surgical procedures, which facilitates the retrieval and archiving of past cases.

The surgical microscope consists of two single objective binocular surgical microscopes of small objective type, which can achieve the purpose that two people can observe one target at the same time. With its small size, light weight, stable fixation and convenient movement, it can be moved, adjusted and fixed in all directions as required by medical staff.

1.Remove the microscope lens cap

2. Relax the brake device of the base, gather the cross arms of each section, and tighten the brake handwheel

3. Turn on the power, turn on the switch, and check the function of the instrument

4. The protective cover wraps the microscope lens and forearm, and cuts off the corresponding film under the lens

5. Place the microscope according to the surgical site, brake the base firmly, and tighten the brake handwheel

6.Adjust the lens to the function position

7.Adjust interpupillary distance and eye diopter

8. Turn off the microscope switch after use, and then remove the power supply, fasten the lens cover, put on the protective cover, and organize it.

1. Image display: ^[1]

Microscope lighting bulbs have different lifespans depending on the operating time. If the lamp is damaged and replaced, the system must be cleared to avoid unnecessary loss to the machine. Each time the machine is turned on or off, the lighting system switch should be turned off or the brightness should be minimized to avoid sudden high voltage shocks to damage the light source. In order to meet the requirements of surgical site selection, visual field size, and clarity during the operation, the doctor can adjust the displacement aperture, focal length, height, etc. through the foot control panel. When adjusting, you should move lightly and slowly forward. When you reach the limit position, stop immediately. Overtime idling will damage the motor and cause adjustment failure.
After the microscope is used for a period of time, the joint lock may become too dead or too loose. At this time, the joint lock only needs to be restored to the normal working state according to the situation. Before each use of the microscope, routinely check the joints for looseness, so as not to cause unnecessary trouble during the surgery.
After each use, use an absorbent cotton cleaner to wipe off the dirt on the microscope, otherwise it will be difficult to wipe it off for too long. Cover the microscope cover in a ventilated, dry, dust-free and non-corrosive gas environment.

Establish a maintenance system, and regularly perform maintenance inspection and adjustment by professionals, and perform necessary maintenance and repair of mechanical systems, observation systems, lighting systems, display systems, and circuit parts. In short, care must be taken when using a microscope, not rough handling. In order to extend the service life of the operating microscope, it is necessary to rely on the serious working attitude of the staff and the care and care of the microscope to make it in a good operating state and better function.