How can I clean molds?
mold can be found in several areas throughout the house, for example on window or around the sink. Most often, however, it is a problem in the corners of the bath. Bathhtub Caulking is Smorgasbord for molds because it feeds on humidity and hygienic products. Fortunately, molds can be cleaned, although it can be hard work.
In the fungal cylinder, Bleach is your greatest ally. It kills molds in impact and helps prevent its growth. Clean molds that have already developed in the corners of the bathtub. Use it full strength and let it sit for ten minutes. If you are worried that you are worried about your garment, try to use bleach. Leave the bleach to sit for another 10 minutes to settle in the cracks. If any fungus remains, repeat the process.H or bleach cleaner. Stay with a toothbrush and using a large elbow fat. Rinse the area with hot water and make sure you remove all bleach and mold. You may need to run the shower for about 10 minutes to verify that it is fully rinsed.
After cleaning the mold from the bathtub you will have to dry thoroughly. Use an old towel to shock the area. Any remaining bleach can damage the towel. If you want to prevent further growth of molds, let the area dry for several hours. Spray the corners of the bathtub and mold spray.
may be impossible to clean molds in some areas with excessive accumulation. Remove the seal in these areas with a knife sealant. Apply a new seal layer and allow it to be set until it is stiff.
You can prevent the accumulation of molds, which makes cleaning easier by maintaining a bathroom without moisture. When showering or bathing on or open or open a window. When you are done, dry the walls and corners and let the room remain ventilated. Spray the area regularly with molds and mold sprays. It is easier to clean molds that have not been there for a long time because it did not penetrate deep into the seal.