How do I balance the washing machine?
If your washing machine makes loud sounds, it can be because the machine is unbalanced. A washing machine that is not balanced will not effectively wash clothes. When you try to balance the washing machine, you may need to check the load, make sure the floor and the machine are at the level and determine if the drum of the machine is unbalanced. Before you try to balance the washing machine, make sure you disconnect it or turn it off on the position box.
You can start balancing the washing machine by checking the washing load to see if it causes the machine to be unbalanced. One cause of this problem may be heavy objects in the washing machine. Open the lid or door of the washing machine and redistribute the items inside. If the redistribution of content and restarting the machine does not solve the problem, remove some clothes, because less loads are less likely not to be expressed. The side and front. If the level indicates that the machine is inclined, check that the washing machine legs are adjustable. If so, set the legs until the machine is on the seating level. If you can't adjust your legs, try to place a piece of foam or rubber under the machine that seems to have a problem.
The best surface for the washing machine, especially the front loader, is a concrete floor. The washing machines can become a very heavy weight due to the water weight. If the machine is not on concrete, you may want to strengthen the floor beams if possible, which can help balance the washing machine sitting on the floor that has passed.
The partition inside the washing machine, where clothing is located, is called a drum. Many machines have a weight to this drum, designed to prevent too much vibrations. Check that the screws are on the drums, and if so, tighten them with the key.
If your machine is still unbalanced, it may not be installed correctly. Limiting screw usually holds the drum on site during transport, and if it is not correctly removed, it can cause problems. Check the drum if it is notbolt or clips and make sure nothing is blocked by the drum from the right movement.