How can I win a pool?
In order to win the swimming pool properly, the owner should start by making sure that the pool water is clean residues. Leaves, errors, pine needles and other similar objects should be vacuumed or removed from the pool using a filter or using an extension pole and a network for water spin. The appropriate time to start the winter process is in autumn, just as colors change, but before the leaves have a chance to fall into your pool.
The chemical treatment of your pool is necessary. The mixture of winter chlorine, winter alkalizer and winter powder ensures that your pool remains clean in winter and is ready for use at the end of spring when warmer weather arrives. Many manufacturers supply finished, wintering sets that contain the above chemicals. Each manufacturer has different instructions, so make sure you are proceeding on accurate instructions on your winter set. Essentially, these chemicals will give extremely high levels of chlorine, alkalin and algaeCide in the water to prepare for the winter months in advance. SomeFrom these chemicals, they load the pool filter on while the chemicals are added. Make sure you follow in this direction. If you do not do so, it may result in a stain on your insert.
Once the chemicals are added, the water water is ready for a slight discharge at suitable levels if the pool manufacturer is required. Once a few inches are below the skimmer and output openings, you can stop draining and remove the filter hoses connected to the skimmer and output hole. If the drain is not required, cover the Skimmer filter and the outlet opening with the appropriate covers. This cover prevents water and ice leakage enforces the way out. Remove the filter hoses with the covers on site. Open the drain at the bottom of the filter and leave any water in the outlet filter. Store the filter and hoses in the garage or basement throughout the winter. Leaving the filter outside during the winter will lead to serious damage, especially if you fail to drain the filter.
The last item needed for the right winter is the pool cover. However, you should install float equipment in the center of the pool before stretching the cover over the pool. This device can be a vehicle or truck tube or a large inflatable winter pillow sold to the pool supplier for this purpose. Float serves two functions. First, it balances rainwater and ice, which will certainly create on the cover of your pool during the winter. Second, the area around the float freezes over the winter and allows the ice to push inwards towards the float rather than out towards the pool wall. This will facilitate tension on the walls of the pool, a condition that can lead to problems later.
Finally, stretch the cover over the pool and through the float using the bottom or three more to help. Once the cover is in place, you should pass the robust wire through the holes that run along the outer seam of the cover. Pull the wire firmly using a hand wench or similar tool so thatThe cover fit comfortably around the pool. The inability to ensure the right cover will result in the pool cover will come out during high winds or heavy rains. Your swimming pool is now ready to fight winter elements and will be ready for sparkling clean opening.