How can I seal the bathtub?

While some of the work to improve houses are better left to experts, learn to comfort a bath or sink is an easy project do-it-yourself, which in the long run can save a lot of money. The bath seals process is just a matter of cleaning the surface, buying the right products, and then using a few simple techniques to complete this work. For beginners, acrylic latex seals are recommended for bathroom seals because they are east to work with them. They come in different colors to match your bathroom tile or color, and do not have as strong odor as silicone seals. Do not forget to buy a seal made for baths and sinks or bathrooms and kitchens. You need to start with a fresh, clean surface to adhere to the new seal properly and provide the best barrier against the water. And the ainter, the razor scraper, or any type of scratch that performs work and does not damage the surface. Be sure to get all the old seals, including the rest and any workhu. Then make sure that the area between the bath and the wall is dry before trying to apply a new chirrt.

Painter tape that will not damage the color on the wall and comes out clean and your seal will be needed for the next step. Glue the area you want to seal to protect the walls and bathtubs, so you don't get a seal where you don't want it. Trim the tube nozzle with a 45 ° angle seal, so the resulting hole is large enough to fill the joint where the seal will go. With a smooth, even pressure on the weapon, place the path of the seal along the seam; Try to keep your weapon moving at a smooth pace to make your seal even along the joint.

further, smooth the joint using the damp paper towel or RAG, which will press along the seals you have just laid. You want to push the seal into the joint and suddenly smooth the surface. Try to make the joint as modern and smoothed as possible. You can even tryA small plastic tool with a curved edge that will help you with this process, but many people just use a finger and a little water to do with greater control. Carefully remove the tape and wipe all the smudges you could make. Wait at least 24 hours after you have sealed a bath or sink before use, so the seal has enough time to dry and harden.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?