How do I get rid of the basement?
To get rid of the basement of thece, you will need to check the basement and area surrounding your home. Start by examining all the troughs and downspauts to make sure they divert water from your home. Next, determine whether the problem with moisture is caused by leakage or condensation. This can be determined by performing a simple test inside the basement. If you find that the moisture problem is caused by leakage, you will need to use waterproof sealant on the floor and inner walls of the basement.
condensation occurs on the inner walls is often wrong behind the basement. The easiest way to find out whether leakage or condensation occurs is to stick a square sheet of aluminum foil to the wall, where moisture is usually present. Make sure the edges of the foil are firmly sealed and leave it in place for several days. When you remove the foil from the wall, check both sides for moisture. If the side side to the wall is wet, the basement is promoted.
When selecting a sealant, it is important to understand the difference between the water coating and the waterproof seal. For above -ground applications, water coating, external application is used to avoid saturated moisture. It is not designed to prevent leakage of the basement and is inappropriate. On the other hand, the waterproof seal is designed to create a barrier against moisture entering the basement from the outside of the walls and floor. The barrier created by a waterproof sealant can be the most effective way to get rid of the basement.
Before using the seal, you must decide the type needed for your basement. If the walls and floor of your basement are made of cement, you should use glass fiber -type sealants that penetrate holes and cracks for maximum protection. Walls or floors made of bricks require a seal that allows the material to breathe while maintaining moisture simultaneously. Be sure to grind or scratch before applyingAt the painted walls and fix any large cracks joint filler. Before applying the final coat, you may want to connect the repaired seal areas.
After you have prepared the surfaces, you can start using the sealant. A cylinder can be used for wide areas, but a brush will be needed to achieve the best level of protection. Be sure to follow the sealing manufacturer's instructions to avoid too thin the product spread. Some surfaces may require the other coat to provide maximum protection. Do not forget to add a lot of fresh air to the basement when you apply the sealant.