How can I install the glass block windows in the basement?
The basement windows are useful to allow light to otherwise dark spaces, but not every basement requires windows that can be opened. In many cases, in many cases, glass bloc windows, which tend to be cheaper and more durable than conventional windows, subject to approval of local building regulations. The process of installing windows of the basement of the glass block begins with careful measurement and planning, followed by a selection of materials. The old window is then removed and the new glass block window is safe.
The first step in installing windows of the basement of the glass block is cautious measurement. The window hole size should be measured from cement to cement and cement to the sill plate. If the opening of the window is irregularly shaped, all dimensions should be measured carefully, as such windows are likely to require either special order panels or hand assembly.
Glass windows for the basement block can be purchased in prefabricated panels or assemblyon site from individual blocks. The panels are generally easier to install, but they may be tailored to Windows in non -standard sizes. Assembly of the window from each block requires more patience, but allows special effects such as curved windows.
As soon as the materials, including the mortar, are obtained, the old window must be removed. Care should be taken to avoid damaging the broken glass. All wood framing around the window must be removed to the base of the window sill. The highest framing should be carefully removed to avoid damaging the house structure.
After the window is deleted, a block panel or individual blocks can be installed. Wooden blocks should be mounted around the edges of the window to serve as a guide for glass blocks. A flat piece of plywood can be temporarily mounted to provide a common surface, which is particularly useful if jE window assembled from individual blocks.
The installation process itself is direct. The block panel can be easily placed in the window opening and then locked in place. Individual blocks must be installed one by one and should be taken to ensure regular gaps. This process can be a useful plywood grid. The mortar should be applied from both sides of the window to ensure that there are no cavities that could cause window failure. The mortar should be smoothed around the base and sides of the window for both cosmetic reasons and to increase the durability of the glass block windows.