How do I install hard wood floors?
The decision to install hardwood floors without the help of a professional is an ambitious enterprise. It is entirely possible to do if you are informed of this process. Although hardwood floors are a popular floor style, it is necessary to take a number of options and steps to take to properly install hardwood floors.
The first option you need to make before installing hardwood floor is the size of the floor for use. Hardwood floors are available in various widths and stamps. Floor floors come in smaller widths, while the boards tend to be a larger variety, up to 7.78 cm) to width.
In terms of wood, popular types are maple, birch and oak, while premium stamps are clear, selected and common grades. If the installation is carried out without professional help, it is also often more convenient to use preliminary than unfinished wood. Decision to install hard wood floors with unfinished woodAgain, it will require later maintenance.
As soon as you choose the type of wood and floor style, measure the room or rooms where you intend to install hardwood floors. If you measure your measurement to a hardware or underfloor dealer, a business associate should help you determine how much material you need. Be sure to take into account any unusual room shapes that may require additional floor materials. Once you have a floor, it is always good to lay our pieces; Because the boards may have different lengths, you want to make sure you have enough pieces of right lengths for work.
The next step towards installing hardwood flooring includes the assembly of all necessary installation tools. Having at hand is important because stopping the middle process can cause installation problems. Dependence on the type of floor you choose can doDied materials include a line of chalk and pencils, tar paper, drill and/or pneumatic floor nail pistols, spacers and prybar.
After gathering the materials, start preparing the area by careful removal of shoes and checking the podphals for possible problems such as bumps, nails or other irregularities. Make sure the area is clean. Find the location of the floor beams and mark their current position for a later reference along the wall base.
If you want to install a traditional hardwood floor, you will probably need to connect tar paper to the floor first. Start installing by catching the chalk line at the base of the initial wall. Measure the room and create a central line and then postpone another chalk line parallel to the center line and 3/8 inches (9.5 mm) from the wall. Insert the spacers around the edge of the area and create a narrow gap so that the wood can expand without strut.
Select the boards for the first Row that should ideally be straight, long andwide. Align the board with the second chalk line you created and drill the holes over the board and the floor noist. Write the plate in the floor beams and place your nails. After completing the first line, continue by placing and blind nail with a pneumatic floor nail gun over the edges of the previous lines. After obtaining the last line, use the PRY panel and surprise to the location position.
Some types of hardwood flooring are designed to be glued to the substrate, and some brands can even have adhesive strips on the back of the boards. Other types of floors are designed to be stitched together. With the floating floor, the boards are glued together, rather than to the substrate. Which type of installation is best for you will depend on the type and brand of hardwood floor you choose.