How can I repair the plasterboard ceiling?
Plasterboard, whether on the ceiling or wall, is usually easy to fix. The method of repairing the ceiling of plasterboard usually depends on the size of the area that needs work. If the area is small, you may want to buy a drywall repair kit that should have everything you need. For larger areas, it may be necessary to repair the ceiling of plasterboard by tearing old plasterboard and replacing the entire section.
Before repairing the ceiling of the plasterboard, it is good to determine what caused damage. If the damage is damaged by water, you will need to find out where the water comes from. If the ceiling is directly under the roof, damage may be caused by free or missing roof materials. If the ceiling is under the upper story, water damage may be caused by pipe leakage. In both cases, the problem must be found and repaired, or all your work to repair the ceiling will be for nothing, because it will have to be redone.
Preparation is necessary before repairing the ceiling of plasterboard. First, you will need to release all loose or hanging pieces of plasterboard or plasterboard tape. You can do it manually, but it is usually easier to use sandpaper, because it also takes care of any particles that are free but not hanging. Once it is done, you should take a damp cloth and clean the area to make sure there is no residual gravel or powder.
6 Before you start, carefully read the instructions to make sure you understand what you need to do. There are different types of sets on the market and each can have slightly different directions.simpler sets are used by perforated aluminum leaves backed with glue. You should cover the damaged area with aluminum and make sure it exceeds the damaged sorcerets on each side. Then, using a spatula, you strongly worry about the aluminum with a drywall. Allow it to dry completely, then guarantee the rough edges and colors.
If you do not want to useRemove the set, you will have to buy a piece of plasterboard, along with a sleeve and plasterboard. Remove the damaged area and then cut a piece of plasterboard the same size as the piece you cut. The work will go faster if you play from the edges of a piece that you remove, even if it means cut into an undamaged area. Put the new plasterboard and stick it around the edges. Cover the sleeve area and allow it to dry, then paint and sand.