How do I replace the ceiling fan capacitor?
If you want to replace the ceiling fan capacitor, you will need to follow several basic steps. First, make sure you have the correct type of spare capacitor and know its exact location. Next, make sure that the power supply is completely disconnected. Then disassemble the fan until you get access to the ceiling fan capacitor. Finally, replace the defective part, re -assemble the fan and turn on the power supply.
Before you can replace the ceiling fan capacitor, you need to know which spare part to use. To obtain this information, it may be necessary to consult a fans manufacturer. Once you have the right part, determine its exact location in the unit. In most cases, the capacitor is in the metal case located between the luminaire and the fan motor. This housing usually also contains a fan control mechanism. The current should be a ton of the electrical circuit panel is completely safe. If you do not know which circuit breaker or fuse is connected to the ceiling fan, onSubstrate the unit and disconnect each circuit until the fan loses its energy. After disconnecting the electricity, wait a few minutes for the capacitor of the ceiling fan to release any warehouse electricity before continuing with the work.
Remove the luminaire and remove it from the fan. It is important to mark every conductor that disconnects to re -assemble the fan correctly. Keep all the screws and hardware wiring in a safe place to re -assemble. Remove the screws ensuring the bottom plate of the metal case. Locate the ceiling fan capacitor and cut off the wires as close as possible to the component.
Use the wire tool to remove a small amount of insulation from the wires. Connect the wires from the new capacitor of the ceiling fan to the OLD wires using a screw -type wire or CRIMP wire. It may be necessary to arrange a part of the connection to create space for a new capacitor. YouYou are not captured between the lower plate and the case. Connect the bottom plate of the metal case.
Re -connect the cabling from the luminaire to the fan in the correct order. Open the luminaire for the fan and check that it is safely screwed to the metal case. Turn on the power supply to the unit. Check the function of the ceiling fan and the luminaires correctly.