How can I sleep?

There are many places in the house where sleeping is required. The needle need is generally manifested when the room undergoes new painting work, but other cases can guarantee the need to cover small holes in the walls and trim. If you redraw the room, regroup a work of art, install new lining or discover small holes or fries such as nails, in your walls or ceilings, you can disguise them before painting or touch the surface. allow grinding and painting. Before you prepare to rest walls or ceiling, you will need a high -quality component for sleeping marks, a sealant knife, a damp cloth and a fine and medium rough sanding paper. Gather your supplies and then identify all places that require sleeping.

Spacked through the hole caused by nails or screws, lightly sand any rough or torn edges around the hole with medium sanding paper. Using the corner of your dark knife you take a small amount of spackling compound from the container to the Czechpel. Place the upper edge of the blade on the wall, apply a sleeping mixture down to the wall with a fair amount of pressure to work it into the hole. Use less pressure to lower the blade through the area to remove the excess mixture and smoothing the surface.

If you need to make a few crossing on the surface area, it's okay, but when you sleep, less is more. After the compound has dried, it makes it difficult to leave too thick. Before you hoe the area, make sure the product will dry thoroughly. Use fine sandpaper and smooth the spaced area to cope with the walls. Once you have a smooth surface, Cnanes color.

The goal of sleeping is to mask smaller holes and damage to the surface when preparing for surface painting. Keep in mind that even if you can easily combine smaller holes and chips, larger holes or dents, such as holes caused by door buttons or accidental damage, may require a more resistant fastener suchIt may even require complete repair of plasterboard.

Also, keep in mind that if you are trying to connect through the nails of nails in the wood trim, make sure you plan to paint linings and not the lines. If you color the wood lining, fill the holes in the same way before applying the stains. You can buy Spackling Compound, wooden putty and other products for repairing and preparing for the surface of any improvement or hardware.