How can I waterproof basement?
Homeowners who can usually expect a waterproof basement to increase the value of their home and reduce costly repairs in the future. Epoxy and latex waterproof mixtures are commonly used with sealants that are effective in the walls and floor of the basement. The seals can help reduce structural rot and insect contamination that are common in basements that have water leaks. The water usually flows through the paths and holes in the wall to enter the basement, but the water can also leak directly through the wall due to the pressure of outer water. For waterproof basement, existing wall damage should be repaired and a waterproof barrier should be introduced.
The first step to the waterproof basement is to find out how the water could enter the basement by performing a visual examination. Walls that have cracks and holes are usually more susceptible to water leakage. Hair line cracks can be filled with a waterproof mixture, while larger openings often require a cement patch that consists of one partial CEMent and two parts of fine sand. In general, a small amount of water is added to the cement mixture, giving it a very strong consistency. Before applying the cement, a hole or crack should be clean and without free rocks.
Once all cracks and holes are corrected, a fine fog of water is usually sprayed onto the wall surface to prepare for a waterproof mixture. The waterproof mixture, which consists of cement and polymer -resistant polymer, is diluted with a specific amount of water, as ordered by the manufacturer on the package of the packaging. In order to successfully waterproof the waterproof mix must be precisely prepared.
After drying the wall, the waterproof mixture is applied to the lower part of the wall with a stiff brush. Progress towards the top with circular brushing is generally the best way to fill the individual's individual. After the wall is covered with one layer of waterproof mixture, the second layer is applied, starting from above and ending at the bottom. AsA pleasantly waterproof mixture dries, the wall is usually sprayed with water and is left overnight. The last step to the waterproof basement is to soak the wall surface the next day and apply the final coat of the waterproof mixture.
It can also be a good idea to solve some problems that can cause water to enter the basement. For example, clogged gutters and downspauts that collect water should be cleaned and the location of the downspuot should be treated so that the water is routed from the basement. The installation of dehumidifiers in the basement can also help reduce the humidity in the air.