Is it easy to replace the toilet?

Replacing a standard toilet is not the most complex water task, but requires some preliminary and muscle strength. The first step is to clean the path between the toilet and its possible resting place. The toilets tend to escape and drip even after removal, so it helps to remove all obstacles and protected carpets. A wheel or dolly should be available for transport. Toilets can be difficult and embarrassing. Thorough cleaning of the toilet will certainly help before replacement.

Once the path is cleaned and cleaned with a working area, several tools will be required. Adjustable key can help turn off the water pipe water located on the wall near the tank. Turn the valve clockwise until the water stops completely. Rinse the toilet several times until the water leaves the tank and the bowl. The cover can be removed and carried away separately to reduce the weight. Once the tank and bowl are completely drained, use a small adjustable key to release the supply line from the tank. It should be withOutcoming, but the residual water may still be present.

When installing the toilet installation, two long screws should be on both sides of the seat and seat setting. These screws are secured by two nuts that can be covered with plastic closures. Remove the closures manually and use a properly mounted socket key or pliers to release these nuts. Once these nuts are removed, swing the tank and the bowls carefully to release the gasket under them.

At this point, further assistance may be required. One strong person should firmly grasp the entire toilet and pull it up directly until the anchor screws (sometimes called the "toilet screws") were cleaned. The toilet should then be placed on a wheel or dolly and move from the bathroom for disposal. Meanwhile other persons should have an old cloth prepared to pull out the central pipe exposed to the n process náhrady. This pipe is a direct pipeline into the sewage system, so harmful vapors and gases can escape if they are not quickly covered. Plumbing shops carry a professional cap designed to adapt to this tube unless another toilet is installed immediately.

The last step in replacing the toilet is to bring a new one. First, scrape the wax seal and replace it with a new one that can be purchased at most domestic centers. The installation of a new toilet proceeds similarly to removal, but vice versa. Although the whole process can be slightly demanding for some, the new toilet usually breathes a new life in the bathroom.