What are furnaces on firewood?
kiln firewood is an insulated chamber into which heat is introduced to dry firewood. Fuel timber pounds are a comfortable way to play over the unpredictability of the weather. Fuel timber, which has been dried, will produce more heat and fewer condensates such as creative, which is one of the main causes of chimney fires.
When the furnace is used in firewood, the cutting of firewood is placed in the baskets. These baskets are usually made of fencing or industrial wire and iron angle and are located on pallets or shelves in the chamber. Once all wood is loaded, the chamber warms. KIC firewood is equipped with fans that circulate the air in the chamber, so the humidity is scattered through the holes.
Since the temperature directly affects the drying process, it is important that the temperature in the furnace in the fuel wood is maintained high and relative humidity on the constants. Drying time depends on the type and amount of wood as well as the thickness.Soft wood, such as pine, is easier to process than hard wood and less time dries thoroughly.
It is important to realize that intense heat can sometimes affect the quality of dried wood. Temperature and humidity must be monitored throughout the process. In addition to nodes that naturally occur, defects such as rupture and collapse of wood can sometimes result in uneven drying or shrinking wood.
pounds of firewood that are not produced commercially are usually constructed from transport containers or shelters that have been converted only for drying of wood. Transport containers are preferred due to their portability and durability. These containers made of stainless steel will not be rusty. During the converting process, the container is insulated and equipped with fans and holes for proper air. The container door is also lined to create a hermet when closedIic seal.
wooden furnaces use direct or indirect sources to introduce heat into the chamber. Some firewood furnaces use heat exchangers that are driven by steam produced during the drying process, which is considered an indirect source. Other furnaces use direct sources to produce heat by natural gas or electricity. Kilks generally reach a minimum temperature of 160 ° F (71 ° C) and can potentially reach heating temperatures up to 200 ° C, which may lead to a reduction in the wood moisture content to the expected level of 10 to 20%.
firewood, which is dried in the furnace, is free of mistakes and molds, allowing clean storage. Because it is properly spicy, the dried wood after burning in the furnace leaves a small ashes, smaller particles and no creature behind. In addition, the wood burns warmer and longer when it was dried properly. Disadvantages of fuel firewood and generally assumes that it includes the amount of time required for actual drying and monitoring of the process, space needed to set up PECE and operating costs.