What are the best methods for building bricks?

Brick Steps is one of the most traditional and most beautiful types of steps and causes any landscaping to appear well -maintained and professional. The brick layout does not require as much effort and time as someone could expect. Unlike the complexity involved in planning formal steps, brick steps placed outside simply require knowledge of the right size and small workforce. In an ideal situation, the tread depth - when adding to the height of the riser - should equal 25 to 27 inches (63.5 to 68.6 cm). This equation can be flexible; The most important thing to keep in mind is that risers and treads for a single flight of brick should be the same size. If each step has a different depth and height, it can throw a person out of balance while continuing up or down the stairs and cause injury.

Fitcihla enters the garden landscape evenly, the level of the slope must be calculated. Calculate the rise or change the slope level first. Can be calculated by jaKO distance from the bottom of the slope to the top of the slope. Next, calculate the running or horizontal distance of the slope. If you want to find out how many steps will be needed, divide the desired riser height into the overall increase in the slope.

Calculations almost never work to make the steps fit exactly into the slope. In most cases, the landscape painter will have to cut and fill the slope to suit the correct number of bricks. In any case, after the calculations are completed, it is time to create brick steps.

First create rough steps in the ground. Make sure and leave the space for risers and treads and a thick plate of concrete and tread. This is important to allow six to eight inches (15.2 to 20.3 cm) of concrete and a position that decreases below frost in areas where the climate is cooler.

further, assemble the form with a lug -in and then place the gravel bed. Keep the gravel bed of about 4 inches (10.2 cm) from the front of the bricks becauseThere he will pour concrete. The concrete strengthens the front of the stairs to prevent them from separation. Some landscapes even use welded wire networks for further support.

Finally place the bricks in the basket pattern. The pattern is easy because the landscape painter does not require bricks. Add the mortar and throw some fine sand through the finished product. After everything has dried, wipe the sand away and then spray the water lightly to support the settling.