What are the best methods to irrigate the greenhouse?

The selection of the best methods for irrigation of greenhouse schools is usually determined by the size of the greenhouse, how many plants it holds and how much time and money the owner is able to invest in the water supply system. The installation of an irrigation or spraying system can be time -consuming, but can save the owner's daily work of irrigation hands. Some systems require an initial cash investment, but may take years with regular maintenance.

Small greenhouses are usually connected manually. The irrigation can is an acceptable means for small watering of the greenhouse and can lose less water, but can be time consuming. Using a spray nozzle connected to the garden hose can be a better choice and water plants can be faster. Catching magazines - wide, shallow pans that prevent plant escape - can help keep water in reserve for future use. They are commonly sold in garden centers and greenhouse suppliers.

Another possibility of irrigation is irrigation systems

dRIP, sometimes referred to as Mister systems. These systems have a main water supply that is usually connected to the top of the greenhouse. Smaller tubes escape from this main line and hang through plants and drip water directly into the soil. This type of system requires preliminary planning to ensure that the lines are properly placed over the plants. One disadvantage of this system is that it can prevent adding to the greenhouse: every time a new plant is added, a new drip line will also have to be installed.

The Spinkler system can be an effective means of watering greenhouse schools. These systems are usually designed with polyvinyl chloride (PVC.) PVC is lightweight, cheap, durable and easy to work with. It can be purchased in many household improvement stores or plumbing menu. Although the installation of this type of system can be time consuming, it is the best ways to ensure that a large and consistent amount of water is supplied to the plants. There isMany books that help plan and install a sprinkler system.

both irrigation and sprinkler systems can be connected to timers that automatically turn on and off. Some timers are very cheap and basic; A simple reversal of the dial can run water for up to an hour. Other timers are more expensive and more sophisticated, but can be programmed to control water at regular intervals and for a specified time. These timers have the advantage of watering plants, although the owner is unable to spend time in the greenhouse.

any method of irrigation is used, gardeners should remember that roots usually grow 6 to 12 inches (15 to 30 cm) below the soil surface. This is known as the root zone. Although the soil may look or feel moisture on the surface, there is no warranty that the roots receive enough water. The water meter can be set for testing the soil saturation. Has a probe, usually about 18 inches (45.7 cm) long, which can be inserted into the soil to measure the amount of waterin the root zone. It is cheap and available at most garden centers. This tool can be used to determine how the greenhouse irrigation system works effectively.