What are the best tips for connecting to the basement?
In the installation or upgrading in the basement, there are several things to help this work more easily. You know all the relevant electric codes, use the right components for this work, and make sure that the person doing the work is only the work he has qualified. However, the only most important tip is to work safely.
Most geographical areas have some electric code that defines the minimum electrical work requirements. In the United States, the most commonly used electric code is the national electrical code (NEC). In addition, many states, provinces and other local authorities have codes especially for their area that must be satisfied. Ensure that the installation corresponds to all codes, ensuring that the basement connection will not have to be redesigned or lower the value of the home. Some of the most most components in the installation of the basement are circuit breakers, wires and electrical sockets. In most places, a specific size wire is required with certainty the perimeter circuit breaker. For example under NEC, PThe circuit obtains its energy from a 20-commission circuit breaker, the cabling must be 12-meter or larger. In addition, the circuit breaker must be compatible with the circuit breaker panel and fit correctly.
codes are constantly changing, as well as components used in electrical installations. Qualified experts keep these changes step and know the basic rules that apply to all electrical installations. For this reason, all codes define what types of work must be carried out or under the supervision of individuals with a license and which do not require it. Many places allow homeowners to perform some electrical installations of DO-IT-HYOUSELF; What is legally considered to be qualified for performance is different from home to location. Make sure the person performing any cables in the basement is qualified by law.
Safety is always the main problem in any electriInstallation, including basement connection. The procedure for the circuit should always be disconnected before doing any work on it, regardless of the inconvenience it can cause. A device that does not allow the power supply to be used randomly, such as locking the circuit breaker, should always be used if more than one person works in the area. If the work is stopped for electrical installation, all potentially live wires and electric panels should be secured unattended.