What are the best tips for installation after fence?

Post installation is perhaps the most important step in the fence installation process. It is important to ensure that the posts are installed correctly to prevent problems later, as the distance between the posts will dictate how well the fence panels fit; Incorrect customization can lead to cracking, deformation or even release panels. The installation of the fence will often include the sinking of the columns in concrete heels and the feet must be properly designed to prevent water damage and avoiding during frosts. Be sure to explore any specific deviations between the fence after the installation of various materials before attempting the construction process. When pouring concrete underpasses during the installation of the fence, be sure to properly dig holes. The holes should be deeper at the bottom than at the top. This prevents concrete from feasting up during frost. The upper part of the base should be poured in such a way that the upper part of the base is not flat or indented; This prevents water association on the border,Which potentially leads to cracks in concrete. Do not forget to dig a hole deep enough to reach a freezing line; Otherwise, the castle is likely to rise up during the frost.

Once the concrete is poured and the post was placed in place, be sure to merge the posts so that they do not move when the concrete sets. This is particularly important during the installation of vinyl posts on the fence, because the tolerances where vinyl fences are built are made more difficult as the columns are firmly introduced. Make sure the posts are also set at the correct height; Otherwise, it is necessary to dig and re -set up, which will increase the time invested in the project.

If the plotted from wood, make sure to select the right type of wood before installing the fence. The wood should be treated with pressure to prevent deformation, rot or infestation of bugs. Cedar is a good choice of wood becauseIt is naturally resistant to rot, mold, mold and errors, but it tends to be more expensive than other types of wood. Once the post is set on the spot, the builder may reduce the column as needed, but if the builder has chosen vinyl through wood, the columns cannot be reduced after the installed columns are installed.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?