What is artificial wooden finishes?
Faux Wooden finish is a technique of painting that is applied to surfaces to imitate wood. Faux, which means "false" in French, is a way to make cheaper materials such as plastic or tin rock, as if it were made of wood. This technique can also be used to create a cheaper type of wood, such as pine, looks like a more expensive type of wood, such as cherry or mahogany.
If you want to create an artificial wooden surface, the wall or piece of furniture is ground to form a straight surface and then cleaned clean to remove any dirt. Once dry, the base coat of latex enamel colors is applied to create a wooden surface. Often another coat is required, so the original wooden grain, furniture or wall color will not be managed.
Most painters use the wood zzripaling tool to create a real artificial wood treatment. Two main types of wood admission tools are Brayer and ridge. Brayer is a rubber cylinder that has been cut with wood design. BARVA or stain is laminated to the surface Abrayer rolled over it while the color is still wet to leave the design of the wood.
The comb is a flat plastic tool with groove or notches cut to one edge. When the comb is dragged over the wet surface of the color, it removes excess color and leaves the wood pattern. Each wood cursory tool has a specific wood species design, so a second tool would have to be used to create a different wood pattern. Depending on the type of wood chosen, the formula may also include nodes to make it look more authentic. Usually, the clear top top top coat is used, so that artificial wooden finishes are protected.
The most common application for artificial wooden finishes is furniture, but the walls can be painted using faux technique to create the appearance of wood lining. In painting a large area, more than one Brayer design is often used to make aE did not repeat the formula much. For the walls of the painter at the ceiling level and throws on the wall in a straight line. The process is repeated with alternating Brayer designs until the area is completely painted. The resulting artificial wood surface is an economic alternative to lining the entire wall and can be easily painted if the tires of the homeowner owner.