What are the best tips for installation of the attic?

Home attic is a great place for storing rarely used objects or even to specify in a living space. However, if the house owner intends to use space for such purposes, the space will need an attic that is stable and well designed. The first and most important step in installing the attic bottom is to determine how the space will be used, as this usually determines what type of floor is necessary. Insulation will also need to be installed before any floor is determined; This will help increase the comfortable and living space in the attic, but it will also help to regulate the temperatures on the floor down.

The attic space is likely to have several floor beams along the entire length of the house. Once installed, these beams will provide support to the attic day, so it is necessary to perform a thorough check of these beams to ensure that they are strong and undamaged. If any of the beams is damaged, the floor will have to be repaired formerly. NSometimes the beam will have to be replaced solely to ensure the safety and stability of the entire floor.

As soon as the beams are checked, the builder will have to lay plywood leaves to act as a base or floor for the attic. If access to the attic is very narrow, it may be necessary to reduce the leaves of the plywood to narrower strips that fit more easily through the attic hatch or door. Plywood leaves should be screwed or nailed to beams; Nails or screws should be set at regular intervals along the length of the leaves. Nails are cheaper than screws, but the screws ensure that plywood boards do not allow or deform over time. This is particularly important if the attic is frequent use.

Once the plywood is set, the builder may consider other insulation options and the floor. Aluminum insulation can be applied to the substrates to act asThe radiant barrier, thus helping to regulate the temperature more efficiently. This type of insulation is supplied in a role and is spread flat through plywood. Then the finished floor panels can be laid on the upper part of the aluminum. If there is already insulation under the floor, the finished floor materials can be simply laid directly on the plywood. If finished floor materials are not required, the plywood may act as the floor itself.