What are the best tips for laying paving boards?

panel boards can provide an attractive and long -term surface for terraces, driveways and sidewalks. There are some tips for laying paving plates that can improve the quality and appearance of the project. Start with a robust base on which the boards rest. Allow the entire surface to gradually bend for drainage purposes and maintain the level of paving plates in all directions. Apply surface sealant or use polymer sand to prevent future erosion. Dig an area to a depth of at least 6 inches (15 cm) and a tab of the surface with a crushed layer or with a whole gravel. Follow the gravel thoroughly and apply a layer of sand. Create sand until they create a solid layer. During this procedure, a certain type of edge material may be required to contain sand and gravel base. Ire, which allows rainwater drainage. The tiles can bend from one side to the other or from the center. When installing the base material, it is best to slope the area. This area must also bend from whati buildings or houses. Areas that naturally tendency to structure may require that the small retaining wall diverted.

When laying paving plates, the builder's level should be used to maintain each level of the piece. It may be necessary to gently tap the edges of the boards to reach the surface level completely. Place a piece of wood between the hammer and the plate before clicking. The hit of the paving board directly with the hammer can cause it to burst in the future. Avoid walking on balanced pieces until there is a fountain sand.

gradually add filling sand and water the surface with a garden hose or sprayer between applications. This will help to complicate sand and make it multiple to erosion. To prevent stepping on the boards. The location of the temporary marginal material around the perimeter of the pavement prevents excess sand during the process.

In order to prevent future erosion, can be finished on the surfaceo the pavement applied seals. This sealant solidifies compacted sand and helps to hold all materials in place during heavy rains. The use of polymer filling sand is another way to prevent erosion. Polymer sand forms a type of mortar when water is applied to it.