What are the best tips for maintenance of brick houses?

Although the brick houses usually take care of, periodic maintenance is still required. When cleaning bricks, it is very important not to use high -pressure or harsh abrasives. Older brick houses often show signs of mold, but this is easy to remove using household cleaners. Brick walls can sometimes escape, so it is good to seal them, especially if the bricks are part of the house foundation.

The common method of cleaning brick houses is using a pressure dishwasher. This should only be done at low pressure to avoid damage to the mortar. If there is no pressure dishwasher, a garden hose with spraying can be used instead. It is good to use attachment that pays water to a wide area than to direct it to small cracks, because the water could then get into the pores of bricks and weaken them.

If you use a pressure dishwasher, a slight household cleaner can be used, but if you use a garden hose and a Container of Siding Cleaner, it can be ideal. One of these cleaning agents withIt connects to the end of the garden hose, so there is no need to mix chemicals. The grains of cleaning agents or those that are particularly strong should avoid, because harsh chemicals sometimes remove the color of bricks and granulars that could cause damage to the mortar or bricks themselves.

should appear mold on brick houses, it is easy to clean with a solution of 1/4 bleach and 3/4 water. The area can be simply with a brush and then rinse with a garden hose. During this time, latex gloves and eye protection should be worn so that the bleach does not burn the skin or come into contact with the eyes.

There are many products to seal bricks and the ideal choice will be approved by the brick industry. Some brands have a can on a can that contains this information or the recommended brands can be found on the Brick Maker website. This product can usually be applied using a brush,which can be ideal for achieving all cracks and slots. At least two layers need to be used, but once it is completed, the sealant usually takes several years to re -tighten the bricks.