What are the best tips for moving the whirlpool?

Moving a hot tub requires the help of several people and can be dangerous if not done properly. All cords connected to the bathtub should be removed first and the bathtub should always be dry. A group of people should then turn the bathtub on the side and place each corner on the wood boards. It will also be necessary to use furniture dolls to transport the bathtub. Once the bathtub is brought to the destination, it should be gently reduced to prevent damage. This will probably result in a number of cables that should be packed in a wooden cover. If you do not do so, it may result in someone buried and hurt them. The engine should also be firmly secured

Always ensure that it is completely exhausted and is completely dry. This also means that the drain lock should be tightened. Then turn the bathtub on the side, making it easier to move. Several people will generally be required to complete this step successfully.

Raise one corner before moving the hot tub and place a leaf of robust wood underneath. ItIt is also necessary to do the whirlpool on the other side of the whirlpool. At this point, the same number of people should be on both sides.

Furniture dolls are used by professional moving companies and generally consist of a flat piece of wooden plate or metal frame with carpet material on the surface to prevent furniture from preventing furniture. Two dolls are required to easily move the hot tub. Furniture should be placed under each end. The wood under the plate makes it easier to slip dolls.

As soon as the whirlpool has been moved to your destinatuion, remove the dolls from under one by one. This is the key phase of movement of the hot tub. The bath must be lowered slowly and steadily. If the bath is falling to the ground too fast, it could burst or break it.

Every person should catch one corner of the whirlpool and run it to the ground. It is good to keep a leaf of wood under each corner of the bathtub because it turns back into yourusual horizontal positions. Once the whirlpool has been successfully placed in place, remove each leaf of wood after a second lifting each corner of the bath.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?